diff options
Diffstat (limited to 'bin/git-remote-gcrypt')
| -rwxr-xr-x | bin/git-remote-gcrypt | 921 |
1 files changed, 0 insertions, 921 deletions
diff --git a/bin/git-remote-gcrypt b/bin/git-remote-gcrypt deleted file mode 100755 index 8b66f2f..0000000 --- a/bin/git-remote-gcrypt +++ /dev/null @@ -1,921 +0,0 @@ -#!/bin/sh - -# git-remote-gcrypt -# -# Copyright (c) 2013 engla -# Copyright (c) 2013, 2014 Joey Hess <id@joeyh.name> -# Copyright (c) 2016 Sean Whitton <spwhitton@spwhitton.name> and contributors -# -# This program is free software: you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation, either version 3 of the License, or -# (at your option) version 2 or any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program. If not, see <http://www.gnu.org/licenses/>. -# -# See README.rst for usage instructions - -set -e # errexit -set -f # noglob -set -C # noclobber - -export GITCEPTION="${GITCEPTION:-}+" # Reuse $Gref except when stacked -Gref="refs/gcrypt/gitception$GITCEPTION" -Gref_rbranch="refs/heads/master" -Packkey_bytes=63 # nbr random bytes for packfile keys, any >= 256 bit is ok -Hashtype=SHA256 # SHA512 SHA384 SHA256 SHA224 supported. -Manifestfile=91bd0c092128cf2e60e1a608c31e92caf1f9c1595f83f2890ef17c0e4881aa0a -Hex40="[a-f0-9]" -Hex40=$Hex40$Hex40$Hex40$Hex40$Hex40$Hex40$Hex40$Hex40 -Hex40=$Hex40$Hex40$Hex40$Hex40$Hex40 # Match SHA-1 hexdigest -GPG="$(git config --get "gpg.program" '.+' || echo gpg)" - -Did_find_repo= # yes for connected, no for no repo -Localdir="${GIT_DIR:=.git}/remote-gcrypt" -Tempdir= - -Repoid= -Refslist= -Packlist= -Keeplist= -Extnlist= -Repack_limit=25 - -Recipients= - -# compat/utility functions -# xfeed: The most basic output function puts $1 into the stdin of $2..$# -xfeed() -{ - local input_= - input_=$1; shift - "$@" <<EOF -$input_ -EOF -} -xecho() { xfeed "$*" cat; } -xecho_n() { xecho "$@" | tr -d \\n ; } # kill newlines -echo_git() { xecho "$@" ; } # Code clarity -echo_info() { xecho "gcrypt:" "$@" >&2; } -echo_die() { echo_info "$@" ; exit 1; } - -isnull() { case "$1" in "") return 0;; *) return 1;; esac; } -isnonnull() { ! isnull "$1"; } -iseq() { case "$1" in "$2") return 0;; *) return 1;; esac; } -isnoteq() { ! iseq "$1" "$2"; } -negate() { ! "$@"; } - -# Execute $@ or die -pipefail() -{ - "$@" || { echo_info "'$1' failed!"; kill $$; exit 1; } -} - -isurl() { isnull "${2%%$1://*}"; } -islocalrepo() { isnull "${1##/*}" && [ ! -e "$1/HEAD" ]; } - -xgrep() { command grep "$@" || : ; } - -# setvar is used for named return variables -# $1 *must* be a valid variable name, $2 is any value -# -# Conventions -# return variable names are passed with a @ prefix -# return variable functions use f_ prefix local vars -# return var consumers use r_ prefix vars (or Titlecase globals) -setvar() -{ - isnull "${1##@*}" || echo_die "Missing @ for return variable: $1" - eval ${1#@}=\$2 -} - -Newline=" -" - -# $1 is return var, $2 is value appended with newline separator -append_to() -{ - local f_append_tmp_= - eval f_append_tmp_=\$${1#@} - isnull "$f_append_tmp_" || f_append_tmp_=$f_append_tmp_$Newline - setvar "$1" "$f_append_tmp_$2" -} - -# Pick words from each line -# $1 return variable name -# $2 input value -pick_fields_1_2() -{ - local f_ret= f_one= f_two= - while read f_one f_two _ # from << here-document - do - f_ret="$f_ret$f_one $f_two$Newline" - done <<EOF -$2 -EOF - setvar "$1" "${f_ret#$Newline}" -} - -# Take all lines matching $2 (full line) -# $1 return variable name -# $2 filter word -# $3 input value -# if $1 is a literal `!', the match is reversed (and arguments shift) -# we instead remove all lines matching -filter_to() -{ - local f_neg= f_line= f_ret= IFS= - isnoteq "$1" "!" || { f_neg=negate; shift; } - IFS=$Newline - for f_line in $3 - do - $f_neg isnonnull "${f_line##$2}" || f_ret=$f_ret$f_line$Newline - done - setvar "$1" "${f_ret%$Newline}" -} - -# Output the number of lines in $1 -line_count() -{ - local IFS= - IFS=$Newline - set -- $1 - xecho "$#" -} - - -## gitception part -# Fetch giturl $1, file $2 -gitception_get() -{ - # Take care to preserve FETCH_HEAD - local ret_=: obj_id= fet_head="$GIT_DIR/FETCH_HEAD" - [ -e "$fet_head" ] && command mv -f "$fet_head" "$fet_head.$$~" || : - git fetch -q -f "$1" "$Gref_rbranch:$Gref" >/dev/null && - obj_id="$(git ls-tree "$Gref" | xgrep -E '\b'"$2"'$' | awk '{print $3}')" && - isnonnull "$obj_id" && git cat-file blob "$obj_id" && ret_=: || - { ret_=false && : ; } - [ -e "$fet_head.$$~" ] && command mv -f "$fet_head.$$~" "$fet_head" || : - $ret_ -} - -anon_commit() -{ - GIT_AUTHOR_NAME="root" GIT_AUTHOR_EMAIL="root@localhost" \ - GIT_AUTHOR_DATE="1356994801 -0400" GIT_COMMITTER_NAME="root" \ - GIT_COMMITTER_EMAIL="root@localhost" \ - GIT_COMMITTER_DATE="1356994801 -0400" \ - git commit-tree "$@" <<EOF -Initial commit -EOF -} - -# Get 'tree' from $1, change file $2 to obj id $3 -update_tree() -{ - local tab_=" " - # $2 is a filename from the repo format - (set +e; - git ls-tree "$1" | xgrep -v -E '\b'"$2"'$'; - xecho "100644 blob $3$tab_$2" - ) | git mktree -} - -# Put giturl $1, file $2 -# depends on previous GET to set $Gref and depends on PUT_FINAL later -gitception_put() -{ - local obj_id= tree_id= commit_id= - obj_id=$(git hash-object -w --stdin) && - tree_id=$(update_tree "$Gref" "$2" "$obj_id") && - commit_id=$(anon_commit "$tree_id") && - git update-ref "$Gref" "$commit_id" -} - -# Remove giturl $1, file $2 -# depends on previous GET like put -gitception_remove() -{ - local tree_id= commit_id= tab_=" " - # $2 is a filename from the repo format - tree_id=$(git ls-tree "$Gref" | xgrep -v -E '\b'"$2"'$' | git mktree) && - commit_id=$(anon_commit "$tree_id") && - git update-ref "$Gref" "$commit_id" -} - -gitception_new_repo() -{ - local commit_id= empty_tree=4b825dc642cb6eb9a060e54bf8d69288fbee4904 - # get any file to update Gref, and if it's not updated we create empty - git update-ref -d "$Gref" || : - gitception_get "$1" "x" 2>/dev/null >&2 || : - git rev-parse -q --verify "$Gref" >/dev/null && return 0 || - commit_id=$(anon_commit "$empty_tree") && - git update-ref "$Gref" "$commit_id" -} -## end gitception - -# Fetch repo $1, file $2, tmpfile in $3 -GET() -{ - if isurl sftp "$1" - then - (exec 0>&-; curl -s -S -k "$1/$2") > "$3" - elif isurl rsync "$1" - then - (exec 0>&-; rsync -I -W "${1#rsync://}"/"$2" "$3" >&2) - elif islocalrepo "$1" - then - cat "$1/$2" > "$3" - else - gitception_get "${1#gitception://}" "$2" > "$3" - fi -} - -# Put repo $1, file $2 or fail, tmpfile in $3 -PUT() -{ - if isurl sftp "$1" - then - curl -s -S -k --ftp-create-dirs -T "$3" "$1/$2" - elif isurl rsync "$1" - then - rsync -I -W "$3" "${1#rsync://}"/"$2" >&2 - elif islocalrepo "$1" - then - cat >| "$1/$2" < "$3" - else - gitception_put "${1#gitception://}" "$2" < "$3" - fi -} - -# Put all PUT changes for repo $1 at once -PUT_FINAL() -{ - if isurl sftp "$1" || islocalrepo "$1" || isurl rsync "$1" - then - : - else - git push --quiet -f "${1#gitception://}" "$Gref:$Gref_rbranch" - fi -} - -# Put directory for repo $1 -PUTREPO() -{ - if isurl sftp "$1" - then - : - elif isurl rsync "$1" - then - rsync -q -r --exclude='*' "$Localdir/" "${1#rsync://}" >&2 - elif islocalrepo "$1" - then - mkdir -p "$1" - else - gitception_new_repo "${1#gitception://}" - fi -} - -# For repo $1, delete all newline-separated files in $2 -REMOVE() -{ - local fn_= - if isurl sftp "$1" - then - # FIXME - echo_info "sftp: Ignore remove request $1/$2" - elif isurl rsync "$1" - then - xfeed "$2" rsync -I -W -v -r --delete --include-from=- \ - --exclude='*' "$Localdir"/ "${1#rsync://}/" >&2 - elif islocalrepo "$1" - then - for fn_ in $2; do - rm -f "$1"/"$fn_" - done - else - for fn_ in $2; do - gitception_remove "${1#gitception://}" "$fn_" - done - fi -} - -CLEAN_FINAL() -{ - if isurl sftp "$1" || islocalrepo "$1" || isurl rsync "$1" - then - : - else - git update-ref -d "$Gref" || : - fi -} - -ENCRYPT() -{ - rungpg --batch --force-mdc --compress-algo none --trust-model=always --passphrase-fd 3 -c 3<<EOF -$1 -EOF -} - -DECRYPT() -{ - rungpg -q --batch --no-default-keyring --secret-keyring /dev/null \ - --keyring /dev/null --passphrase-fd 3 -d 3<<EOF -$1 -EOF -} - -# Encrypt to recipients $1 -PRIVENCRYPT() -{ - set -- $1 - if isnonnull "$Conf_signkey"; then - set -- "$@" -u "$Conf_signkey" - fi - rungpg --compress-algo none --trust-model=always -se "$@" -} - -# $1 is the match for good signature, $2 is the textual signers list -PRIVDECRYPT() -{ - local status_= - exec 4>&1 && - status_=$(rungpg --status-fd 3 -q -d 3>&1 1>&4) && - xfeed "$status_" grep "^\[GNUPG:\] ENC_TO " >/dev/null && - (xfeed "$status_" grep -e "$1" >/dev/null || { - echo_info "Failed to verify manifest signature!" && - echo_info "Only accepting signatories: ${2:-(none)}" && - return 1 - }) -} - -# Generate $1 random bytes -genkey() -{ - rungpg --armor --gen-rand 1 "$1" -} - -gpg_hash() -{ - local hash_= - hash_=$(rungpg --with-colons --print-md "$1" | tr A-F a-f) - hash_=${hash_#:*:} - xecho "${hash_%:}" -} - -rungpg() -{ - if isnonnull "$Conf_gpg_args"; then - set -- "$Conf_gpg_args" "$@" - fi - # gpg will fail to run when there is no controlling tty, - # due to trying to print messages to it, even if a gpg agent is set - # up. --no-tty fixes this. - if [ "x$GPG_AGENT_INFO" != "x" ]; then - ${GPG} --no-tty $@ - else - ${GPG} $@ - fi -} - -# Pass the branch/ref by pipe to git -safe_git_rev_parse() -{ - git cat-file --batch-check 2>/dev/null | - xgrep -v "missing" | cut -f 1 -d ' ' -} - -make_new_repo() -{ - echo_info "Setting up new repository" - PUTREPO "$URL" - - # Needed assumption: the same user should have no duplicate Repoid - Repoid=":id:$(genkey 15)" - iseq "${NAME#gcrypt::}" "$URL" || - git config "remote.$NAME.gcrypt-id" "$Repoid" - echo_info "Remote ID is $Repoid" - Extnlist="extn comment" -} - - -# $1 return var for goodsig match, $2 return var for signers text -read_config() -{ - local recp_= r_tail= r_keyinfo= r_keyfpr= gpg_list= cap_= conf_part= good_sig= signers_= - Conf_signkey=$(git config --get "remote.$NAME.gcrypt-signingkey" '.+' || - git config --path user.signingkey || :) - conf_part=$(git config --get "remote.$NAME.gcrypt-participants" '.+' || - git config --get gcrypt.participants '.+' || :) - Conf_pubish_participants=$(git config --get --bool "remote.$NAME.gcrypt-publish-participants" '.+' || - git config --get --bool gcrypt.publish-participants || :) - Conf_gpg_args=$(git config --get gcrypt.gpg-args '.+' || :) - - # Figure out which keys we should encrypt to or accept signatures from - if isnull "$conf_part" || iseq "$conf_part" simple - then - signers_="(default keyring)" - Recipients="--throw-keyids --default-recipient-self" - good_sig="^\[GNUPG:\] GOODSIG " - setvar "$1" "$good_sig" - setvar "$2" "$signers_" - return 0 - fi - - for recp_ in $conf_part - do - gpg_list=$(rungpg --with-colons --fingerprint -k "$recp_") - r_tail_=$(echo "$recp_" | sed -e 's/^0x//') - filter_to @r_keyinfo "pub*" "$gpg_list" - if echo "$recp_" | grep -E -q '^[xA-F0-9]+$'; then # is $recp_ a keyid? - filter_to @r_keyfpr "fpr*$r_tail_*" "$gpg_list" - else - filter_to @r_keyfpr "fpr*" "$gpg_list" - fi - isnull "$r_keyinfo" || isnonnull "${r_keyinfo##*"$Newline"*}" || - echo_info "WARNING: '$recp_' matches multiple keys, using one" - isnull "$r_keyfpr" || isnonnull "${r_keyfpr##*"$Newline"*}" || - echo_info "WARNING: '$recp_' matches multiple fingerprints, using one" - r_keyinfo=${r_keyinfo%%"$Newline"*} - r_keyfpr=${r_keyfpr%%"$Newline"*} - keyid_=$(xfeed "$r_keyinfo" cut -f 5 -d :) - fprid_=$(xfeed "$r_keyfpr" cut -f 10 -d :) - - isnonnull "$fprid_" && - signers_="$signers_ $keyid_" && - append_to @good_sig "^\[GNUPG:\] VALIDSIG .*$fprid_$" || { - echo_info "WARNING: Skipping missing key $recp_" - continue - } - # Check 'E'ncrypt capability - cap_=$(xfeed "$r_keyinfo" cut -f 12 -d :) - if ! iseq "${cap_#*E}" "$cap_"; then - if [ "$Conf_pubish_participants" = true ]; then - Recipients="$Recipients -r $keyid_" - else - Recipients="$Recipients -R $keyid_" - fi - fi - done - - if isnull "$Recipients" - then - echo_info "You have not configured any keys you can encrypt to" \ - "for this repository" - echo_info "Use ::" - echo_info " git config gcrypt.participants YOURKEYID" - exit 1 - fi - setvar "$1" "$good_sig" - setvar "$2" "$signers_" -} - -ensure_connected() -{ - local manifest_= r_repoid= r_name= url_frag= r_sigmatch= r_signers= \ - tmp_manifest= - - if isnonnull "$Did_find_repo" - then - return - fi - Did_find_repo=no - read_config @r_sigmatch @r_signers - - iseq "${NAME#gcrypt::}" "$URL" || r_name=$NAME - - if isurl gitception "$URL" && isnonnull "$r_name"; then - git config "remote.$r_name.url" "gcrypt::${URL#gitception://}" - echo_info "Updated URL for $r_name, gitception:// -> ()" - fi - - # Find the URL fragment - url_frag=${URL##*"#"} - isnoteq "$url_frag" "$URL" || url_frag= - URL=${URL%"#$url_frag"} - - # manifestfile -- sha224 hash if we can, else the default location - if isurl sftp "$URL" || islocalrepo "$URL" || isurl rsync "$URL" - then - # not for gitception - isnull "$url_frag" || - Manifestfile=$(xecho_n "$url_frag" | gpg_hash SHA224) - else - isnull "$url_frag" || Gref_rbranch="refs/heads/$url_frag" - fi - - Repoid= - isnull "$r_name" || - Repoid=$(git config "remote.$r_name.gcrypt-id" || :) - - - tmp_manifest="$Tempdir/maniF" - GET "$URL" "$Manifestfile" "$tmp_manifest" 2>/dev/null || { - echo_info "Repository not found: $URL" - if ! isnull "$Repoid"; then - echo_info "..but repository ID is set. Aborting." - return 1 - else - return 0 - fi - } - - Did_find_repo=yes - echo_info "Decrypting manifest" - manifest_=$(PRIVDECRYPT "$r_sigmatch" "$r_signers" < "$tmp_manifest") && - isnonnull "$manifest_" || - echo_die "Failed to decrypt manifest!" - rm -f "$tmp_manifest" - - filter_to @Refslist "$Hex40 *" "$manifest_" - filter_to @Packlist "pack :*:* *" "$manifest_" - filter_to @Keeplist "keep :*:*" "$manifest_" - filter_to @Extnlist "extn *" "$manifest_" - filter_to @r_repoid "repo *" "$manifest_" - - r_repoid=${r_repoid#repo } - r_repoid=${r_repoid% *} - if isnull "$Repoid" - then - echo_info "Remote ID is $r_repoid" - Repoid=$r_repoid - elif isnoteq "$r_repoid" "$Repoid" - then - echo_info "WARNING:" - echo_info "WARNING: Remote ID has changed!" - echo_info "WARNING: from $Repoid" - echo_info "WARNING: to $r_repoid" - echo_info "WARNING:" - Repoid=$r_repoid - else - return 0 - fi - - isnull "$r_name" || git config "remote.$r_name.gcrypt-id" "$r_repoid" -} - -# $1 is the hash type (SHA256 etc) -# $2 the pack id -# $3 the key -get_verify_decrypt_pack() -{ - local rcv_id= tmp_encrypted= - tmp_encrypted="$Tempdir/packF" - GET "$URL" "$2" "$tmp_encrypted" && - rcv_id=$(gpg_hash "$1" < "$tmp_encrypted") && - iseq "$rcv_id" "$2" || echo_die "Packfile $2 does not match digest!" - DECRYPT "$3" < "$tmp_encrypted" - rm -f "$tmp_encrypted" -} - -# download all packlines (pack :SHA256:a32abc1231) from stdin (or die) -# $1 destdir (when repack, else "") -get_pack_files() -{ - local pack_id= r_pack_key_line= htype_= pack_= key_= - while IFS=': ' read -r _ htype_ pack_ # <<here-document - do - isnonnull "$pack_" || continue - - # Get the Packlist line with the key - pack_id=":${htype_}:$pack_" - filter_to @r_pack_key_line "pack $pack_id *" "$Packlist" - key_=${r_pack_key_line#pack $pack_id } - - if isnonnull "${pack_##$Hex40*}" || - isnoteq "$htype_" SHA256 && isnoteq "$htype_" SHA224 && - isnoteq "$htype_" SHA384 && isnoteq "$htype_" SHA512 - then - echo_die "Packline malformed: $pack_id" - fi - - get_verify_decrypt_pack "$htype_" "$pack_" "$key_" | \ - if isnull "${1:-}" - then - # add to local pack list - git index-pack -v --stdin >/dev/null - xecho "pack $pack_id" >> "$Localdir/have_packs$GITCEPTION" - else - git index-pack -v --stdin "$1/${pack_}.pack" >/dev/null - fi - done -} - -# Download and unpack remote packfiles -# $1 return var for list of packfiles to delete -repack_if_needed() -{ - local n_= m_= kline_= r_line= r_keep_packlist= r_del_list= - - isnonnull "$Packlist" || return 0 - - if isnonnull "${GCRYPT_FULL_REPACK:-}" - then - Keeplist= - Repack_limit=0 - fi - - pick_fields_1_2 @r_del_list "$Packlist" - - n_=$(line_count "$Packlist") - m_=$(line_count "$Keeplist") - if iseq 0 "$(( $Repack_limit < ($n_ - $m_) ))"; then - return - fi - echo_info "Repacking remote $NAME, ..." - - mkdir "$Tempdir/pack" - - # Split packages to keep and to repack - if isnonnull "$Keeplist"; then - while read -r _ kline_ _ # <<here-document - do - isnonnull "$kline_" || continue - filter_to @r_line "pack $kline_ *" "$Packlist" - append_to @r_keep_packlist "$r_line" - filter_to ! @r_del_list "pack $kline_" "$r_del_list" - done <<EOF -$Keeplist -EOF - fi - - xfeed "$r_del_list" get_pack_files "$Tempdir/pack/" - - (set +f; pipefail git verify-pack -v "$Tempdir"/pack/*.idx) | - grep -E '^[0-9a-f]{40}' | cut -f 1 -d ' ' - - Packlist=$r_keep_packlist - setvar "$1" "$r_del_list" -} - -do_capabilities() -{ - echo_git fetch - echo_git push - echo_git -} - -do_list() -{ - local obj_id= ref_name= line_= - ensure_connected - - xecho "$Refslist" | while read line_ - do - isnonnull "$line_" || break - obj_id=${line_%% *} - ref_name=${line_##* } - echo_git "$obj_id" "$ref_name" - if iseq "$ref_name" "refs/heads/master" - then - echo_git "@refs/heads/master HEAD" - fi - done - - # end with blank line - echo_git -} - -do_fetch() -{ - # Download packs in the manifest that don't appear in have_packs - local pneed_= premote_= - - ensure_connected - - # The `+` for $GITCEPTION is pointless but we will be safe for stacking - pick_fields_1_2 @premote_ "$Packlist" - if [ -s "$Localdir/have_packs+" ] - then - pneed_=$(xfeed "$premote_" xgrep -v -x -f "$Localdir/have_packs+") - else - pneed_=$premote_ - fi - - xfeed "$pneed_" get_pack_files - - echo_git # end with blank line -} - -# do_push PUSHARGS (multiple lines like +src:dst, with both + and src opt.) -do_push() -{ - # Security protocol: - # Each git packfile is encrypted and then named for the encrypted - # file's hash. The manifest is updated with the pack id. - # The manifest is encrypted. - local r_revlist= pack_id= key_= obj_= src_= dst_= \ - r_pack_delete= tmp_encrypted= tmp_objlist= tmp_manifest= - - ensure_connected - - if iseq "$Did_find_repo" "no" - then - make_new_repo - fi - - if isnonnull "$Refslist" - then - # mark all remote refs with ^<sha-1> (if sha-1 exists locally) - r_revlist=$(xfeed "$Refslist" cut -f 1 -d ' ' | - safe_git_rev_parse | sed -e 's/^\(.\)/^&/') - fi - - while IFS=: read -r src_ dst_ # << +src:dst - do - src_=${src_#+} - filter_to ! @Refslist "$Hex40 $dst_" "$Refslist" - - if isnonnull "$src_" - then - append_to @r_revlist "$src_" - obj_=$(xfeed "$src_" safe_git_rev_parse) - append_to @Refslist "$obj_ $dst_" - fi - done <<EOF -$1 -EOF - - tmp_encrypted="$Tempdir/packP" - tmp_objlist="$Tempdir/objlP" - - { - xfeed "$r_revlist" git rev-list --objects --stdin -- - repack_if_needed @r_pack_delete - } > "$tmp_objlist" - - # Only send pack if we have any objects to send - if [ -s "$tmp_objlist" ] - then - key_=$(genkey "$Packkey_bytes") - pack_id=$(export GIT_ALTERNATE_OBJECT_DIRECTORIES=$Tempdir; - pipefail git pack-objects --stdout < "$tmp_objlist" | - pipefail ENCRYPT "$key_" | - tee "$tmp_encrypted" | gpg_hash "$Hashtype") - - append_to @Packlist "pack :${Hashtype}:$pack_id $key_" - if isnonnull "$r_pack_delete" - then - append_to @Keeplist "keep :${Hashtype}:$pack_id 1" - fi - fi - - # Generate manifest - echo_info "Encrypting to: $Recipients" - echo_info "Requesting manifest signature" - - tmp_manifest="$Tempdir/maniP" - PRIVENCRYPT "$Recipients" > "$tmp_manifest" <<EOF -$Refslist -$Packlist -$Keeplist -repo $Repoid -$Extnlist -EOF - - # Upload pack - if [ -s "$tmp_objlist" ] - then - PUT "$URL" "$pack_id" "$tmp_encrypted" - fi - - # Upload manifest - PUT "$URL" "$Manifestfile" "$tmp_manifest" - - rm -f "$tmp_encrypted" - rm -f "$tmp_objlist" - rm -f "$tmp_manifest" - - # Delete packs - if isnonnull "$r_pack_delete"; then - REMOVE "$URL" "$(xecho "$r_pack_delete" | \ - while IFS=': ' read -r _ _ pack_ - do - isnonnull "$pack_" || continue - xecho "$pack_" - done)" - fi - - PUT_FINAL "$URL" - - # ok all updates - while IFS=: read -r src_ dst_ # << +src:dst - do - echo_git "ok $dst_" - done <<EOF -$1 -EOF - - echo_git -} - -cleanup_tmpfiles() -{ - if isnonnull "${Tempdir%%*."$$"}"; then - echo_die "Unexpected Tempdir value: $Tempdir" - fi - rm -r -f -- "${Tempdir}" >&2 -} - -setup() -{ - mkdir -p "$Localdir" - - # Set up a subdirectory in /tmp - temp_key=$(genkey 9 | tr '/' _) - Tempdir="${TMPDIR:-/tmp}/git-remote-gcrypt-${temp_key}.$$" - case "${MSYSTEM:-unknown}" in - MSYS*|MINGW*) - mkdir "${Tempdir}" - echo_info "Warning: Not securing tempdir ${Tempdir} because we are on mingw/msys" - ;; - unknown|*) - mkdir -m 700 "${Tempdir}" - ;; - esac - - trap cleanup_tmpfiles EXIT - trap 'exit 1' 1 2 3 15 -} - -# handle git-remote-helpers protocol -gcrypt_main_loop() -{ - local input_= input_inner= r_args= temp_key= - - NAME=$1 # Remote name - URL=$2 # Remote URL - - setup - - while read input_ - do - case "$input_" in - capabilities) - do_capabilities - ;; - list|list\ for-push) - do_list - ;; - fetch\ *) - r_args=${input_##fetch } - while read input_inner - do - case "$input_inner" in - fetch*) - r_args= #ignored - ;; - *) - break - ;; - esac - done - do_fetch "$r_args" - ;; - push\ *) - r_args=${input_##push } - while read input_inner - do - case "$input_inner" in - push\ *) - append_to @r_args "${input_inner#push }" - ;; - *) - break - ;; - esac - done - do_push "$r_args" - ;; - ?*) - echo_die "Unknown input!" - ;; - *) - CLEAN_FINAL "$URL" - exit 0 - ;; - esac - done -} - -if [ "x$1" = x--check ] -then - NAME=dummy-gcrypt-check - URL=$2 - setup - ensure_connected - git remote remove $NAME 2>/dev/null || true - if iseq "$Did_find_repo" "no" - then - exit 100 - fi -else - gcrypt_main_loop "$@" -fi |