copy over blog posts from cryptic.io blog

17 files changed, 1136 insertions, 0 deletions

diff --git a/_posts/2014-10-29-erlang-pitfalls.md b/_posts/2014-10-29-erlang-pitfalls.md
new file mode 100644
index 0000000..910db79
--- /dev/null
+++ b/_posts/2014-10-29-erlang-pitfalls.md
@@ -0,0 +1,190 @@
+---
+layout: post
+title: Erlang Pitfalls
+---
+
+I've been involved with a large-ish scale erlang project at Grooveshark since
+sometime around 2011. I started this project knowing absolutely nothing about
+erlang, but now I feel I have accumulated enough knowlege over time that I could
+conceivably give some back. Specifically, common pitfalls that people may run
+into when designing and writing a large-scale erlang application. Some of these
+may show up when searching for them, but some of them you may not even know you
+need to search for.
+
+## now() vs timestamp()
+
+The cononical way of getting the current timestamp in erlang is to use
+`erlang:now()`. This works great at small loads, but if you find your
+application slowing down greatly at highly parallel loads and you're calling
+`erlang:now()` a lot, it may be the culprit.
+
+A property of this method you may not realize is that it is monotonically
+increasing, meaning even if two processes call it at the *exact* same time they
+will both receive different output. This is done through some locking on the
+low-level, as well as a bit of math to balance out the time getting out of sync
+in the scenario.
+
+There are situations where fetching always unique timestamps is useful, such as
+seeding RNGs and generating unique identifiers for things, but usually when
+people fetch a timestamp they just want a timestamp. For these cases,
+`os:timestamp()` can be used. It is not blocked by any locks, it simply returns
+the time.
+
+## The rpc module is slow
+
+The built-in `rpc` module is slower than you'd think. This mostly stems from it
+doing a lot of extra work for every `call` and `cast` that you do, ensuring that
+certain conditions are accounted for. If, however, it's sufficient for the
+calling side to know that a call timed-out on them and not worry about it any
+further you may benefit from simply writing your own rpc module. Alternatively,
+use [one which already exists](https://github.com/cloudant/rexi).
+
+## Don't send anonymous functions between nodes
+
+One of erlang's niceties is transparent message sending between two phsyical
+erlang nodes. Once nodes are connected, a process on one can send any message to
+a process on the other exactly as if they existed on the same node. This is fine
+for many data-types, but for anonymous functions it should be avoided.
+
+For example:
+
+```erlang
+RemotePid ! {fn, fun(I) -> I + 1 end}.
+```
+
+Would be better written as
+
+```erlang
+incr(I) ->
+    I + 1.
+
+RemotePid ! {fn, ?MODULE, incr}.
+```
+
+and then using an `apply` on the RemotePid to actually execute the function.
+
+This is because hot-swapping code messes with anonymous functions quite a bit.
+Erlang isn't actually sending a function definition across the wire; it's simply
+sending a reference to a function. If you've changed the code within the
+anonymous function on a node, that reference changes. The sending node is
+sending a reference to a function which may not exist anymore on the receiving
+node, and you'll get a weird error which Google doesn't return many results for.
+
+Alternatively, if you simply send atoms across the wire and use `apply` on the
+other side, only atoms are sent and the two nodes involved can have totally
+different ideas of what the function itself does without any problems.
+
+## Hot-swapping code is a convenience, not a crutch
+
+Hot swapping code is the bees-knees. It lets you not have to worry about
+rolling-restarts for trivial code changes, and so adds stability to your
+cluster. My warning is that you should not rely on it. If your cluster can't
+survive a node being restarted for a code change, then it can't survive if that
+node fails completely, or fails and comes back up. Design your system pretending
+that hot-swapping does not exist, and only once you've done that allow yourself
+to use it.
+
+## GC sometimes needs a boost
+
+Erlang garbage collection (GC) acts on a per-erlang-process basis, meaning that
+each process decides on its own to garbage collect itself. This is nice because
+it means stop-the-world isn't a problem, but it does have some interesting
+effects.
+
+We had a problem with our node memory graphs looking like an upwards facing
+line, instead of a nice sinusoid relative to the number of connections during
+the day. We couldn't find a memory leak *anywhere*, and so started profiling. We
+found that the memory seemed to be comprised of mostly binary data in process
+heaps. On a hunch my coworker Mike Cugini (who gets all the credit for this) ran
+the following on a node:
+
+```erlang
+lists:foreach(erlang:garbage_collect/1, erlang:processes()).
+```
+
+and saw memory drop in a huge way. We made that code run every 10 minutes or so
+and suddenly our memory problem went away.
+
+The problem is that we had a lot of processes which individually didn't have
+much heap data, but all-together were crushing the box. Each didn't think it had
+enough to garbage collect very often, so memory just kept going up. Calling the
+above forces all processes to garbage collect, and thus throw away all those
+little binary bits they were hoarding.
+
+## These aren't the solutions you are looking for
+
+The `erl` process has tons of command-line options which allow you to tweak all
+kinds of knobs. We've had tons of performance problems with our application, as
+of yet not a single one has been solved with turning one of these knobs. They've
+all been design issues or just run-of-the-mill bugs. I'm not saying the knobs
+are *never* useful, but I haven't seen it yet.
+
+## Erlang processes are great, except when they're not
+
+The erlang model of allowing processes to manage global state works really well
+in many cases. Possibly even most cases. There are, however, times when it
+becomes a performance problem. This became apparent in the project I was working
+on for Grooveshark, which was, at its heart, a pubsub server.
+
+The architecture was very simple: each channel was managed by a process, client
+connection processes subscribed to that channel and received publishes from it.
+Easy right? The problem was that extremely high volume channels were simply not
+able to keep up with the load. The channel process could do certain things very
+fast, but there were some operations which simply took time and slowed
+everything down. For example, channels could have arbitrary properties set on
+them by their owners. Retrieving an arbitrary property from a channel was a
+fairly fast operation: client `call`s the channel process, channel process
+immediately responds with the property value. No blocking involved.
+
+But as soon as there was any kind of call which required the channel process to
+talk to yet *another* process (unfortunately necessary), things got hairy. On
+high volume channels publishes/gets/set operations would get massively backed up
+in the message queue while the process was blocked on another process. We tried
+many things, but ultimately gave up on the process-per-channel approach.
+
+We instead decided on keeping *all* channel state in a transactional database.
+When client processes "called" operations on a channel, they really are just
+acting on the database data inline, no message passing involved. This means that
+read-only operations are super-fast because there is minimal blocking, and if
+some random other process is being slow it only affects the one client making
+the call which is causing it to be slow, and not holding up a whole host of
+other clients.
+
+## Mnesia might not be what you want
+
+This one is probably a bit controversial, and definitely subject to use-cases.
+Do your own testing and profiling, find out what's right for you.
+
+Mnesia is erlang's solution for global state. It's an in-memory transactional
+database which can scale to N nodes and persist to disk. It is hosted
+directly in the erlang processes memory so you interact with it in erlang
+directly in your code; no calling out to database drivers and such. Sounds great
+right?
+
+Unfortunately mnesia is not a very full-featured database. It is essentially a
+key-value store which can hold arbitrary erlang data-types, albeit in a set
+schema which you lay out for it during startup. This means that more complex
+types like sorted sets and hash maps (although this was addressed with the
+introduction of the map data-type in R17) are difficult to work with within
+mnesia. Additionally, erlang's data model of immutability, while awesome
+usually, can bite you here because it's difficult (impossible?) to pull out
+chunks of data within a record without accessing the whole record.
+
+For example, when retrieving the list of processes subscribed to a channel our
+application doesn't simply pull the full list and iterate over it. This is too
+slow, and in some cases the subscriber list was so large it wasn't actually
+feasible. The channel process wasn't cleaning up its heap fast enough, so
+multiple publishes would end up with multiple copies of the giant list in
+memory. This became a problem. Instead we chain spawned processes, each of which
+pull a set chunk of the subsciber list, and iterate over that. This is very
+difficult to implement in mnesia without pulling the full subscriber list into
+the process' memory at some point in the process.
+
+It is, however, fairly trivial to implement in redis using sorted sets. For this
+case, and many other cases after, the motto for performance improvements became
+"stick it in redis". The application is at the point where *all* state which
+isn't directly tied to a specific connection is kept in redis, encoded using
+`term_to_binary`. The performance hit of going to an outside process for data
+was actually much less than we'd originally thought, and ended up being a plus
+since we had much more freedom to do interesting hacks to speedup up our
+accesses.
diff --git a/_posts/2015-07-15-go-http.md b/_posts/2015-07-15-go-http.md
new file mode 100644
index 0000000..29d7486
--- /dev/null
+++ b/_posts/2015-07-15-go-http.md
@@ -0,0 +1,545 @@
+---
+layout: post
+title: Go's http package by example
+---
+
+Go's [http](http://golang.org/pkg/net/http/) package has turned into one of my
+favorite things about the Go programming language. Initially it appears to be
+somewhat complex, but in reality it can be broken down into a couple of simple
+components that are extremely flexible in how they can be used. This guide will
+cover the basic ideas behind the http package, as well as examples in using,
+testing, and composing apps built with it.
+
+This guide assumes you have some basic knowledge of what an interface in Go is,
+and some idea of how HTTP works and what it can do.
+
+## Handler
+
+The building block of the entire http package is the `http.Handler` interface,
+which is defined as follows:
+
+```go
+type Handler interface {
+	ServeHTTP(ResponseWriter, *Request)
+}
+```
+
+Once implemented the `http.Handler` can be passed to `http.ListenAndServe`,
+which will call the `ServeHTTP` method on every incoming request.
+
+`http.Request` contains all relevant information about an incoming http request
+which is being served by your `http.Handler`.
+
+The `http.ResponseWriter` is the interface through which you can respond to the
+request. It implements the `io.Writer` interface, so you can use methods like
+`fmt.Fprintf` to write a formatted string as the response body, or ones like
+`io.Copy` to write out the contents of a file (or any other `io.Reader`). The
+response code can be set before you begin writing data using the `WriteHeader`
+method.
+
+Here's an example of an extremely simple http server:
+
+```go
+package main
+
+import (
+	"fmt"
+	"log"
+	"net/http"
+)
+
+type helloHandler struct{}
+
+func (h helloHandler) ServeHTTP(w http.ResponseWriter, r *http.Request) {
+	fmt.Fprintf(w, "hello, you've hit %s\n", r.URL.Path)
+}
+
+func main() {
+	err := http.ListenAndServe(":9999", helloHandler{})
+	log.Fatal(err)
+}
+```
+
+`http.ListenAndServe` serves requests using the handler, listening on the given
+address:port. It will block unless it encounters an error listening, in which
+case we `log.Fatal`.
+
+Here's an example of using this handler with curl:
+
+```
+ ~ $ curl localhost:9999/foo/bar
+ hello, you've hit /foo/bar
+```
+
+
+## HandlerFunc
+
+Often defining a full type to implement the `http.Handler` interface is a bit
+overkill, especially for extremely simple `ServeHTTP` functions like the one
+above. The `http` package provides a helper function, `http.HandlerFunc`, which
+wraps a function which has the signature
+`func(w http.ResponseWriter, r *http.Request)`, returning an `http.Handler`
+which will call it in all cases.
+
+The following behaves exactly like the previous example, but uses
+`http.HandlerFunc` instead of defining a new type.
+
+```go
+package main
+
+import (
+	"fmt"
+	"log"
+	"net/http"
+)
+
+func main() {
+	h := http.HandlerFunc(func(w http.ResponseWriter, r *http.Request) {
+		fmt.Fprintf(w, "hello, you've hit %s\n", r.URL.Path)
+	})
+
+	err := http.ListenAndServe(":9999", h)
+	log.Fatal(err)
+}
+```
+
+## ServeMux
+
+On their own, the previous examples don't seem all that useful. If we wanted to
+have different behavior for different endpoints we would end up with having to
+parse path strings as well as numerous `if` or `switch` statements.  Luckily
+we're provided with `http.ServeMux`, which does all of that for us.  Here's an
+example of it being used:
+
+```go
+package main
+
+import (
+	"fmt"
+	"log"
+	"net/http"
+)
+
+func main() {
+	h := http.NewServeMux()
+
+	h.HandleFunc("/foo", func(w http.ResponseWriter, r *http.Request) {
+		fmt.Fprintln(w, "Hello, you hit foo!")
+	})
+
+	h.HandleFunc("/bar", func(w http.ResponseWriter, r *http.Request) {
+		fmt.Fprintln(w, "Hello, you hit bar!")
+	})
+
+	h.HandleFunc("/", func(w http.ResponseWriter, r *http.Request) {
+		w.WriteHeader(404)
+		fmt.Fprintln(w, "You're lost, go home")
+	})
+
+	err := http.ListenAndServe(":9999", h)
+	log.Fatal(err)
+}
+```
+
+The `http.ServeMux` is itself an `http.Handler`, so it can be passed into
+`http.ListenAndServe`. When it receives a request it will check if the request's
+path is prefixed by any of its known paths, choosing the longest prefix match it
+can find. We use the `/` endpoint as a catch-all to catch any requests to
+unknown endpoints. Here's some examples of it being used:
+
+```
+ ~ $ curl localhost:9999/foo
+Hello, you hit foo!
+
+ ~ $ curl localhost:9999/bar
+Hello, you hit bar!
+
+ ~ $ curl localhost:9999/baz
+You're lost, go home
+```
+
+`http.ServeMux` has both `Handle` and `HandleFunc` methods. These do the same
+thing, except that `Handle` takes in an `http.Handler` while `HandleFunc` merely
+takes in a function, implicitly wrapping it just as `http.HandlerFunc` does.
+
+### Other muxes
+
+There are numerous replacements for `http.ServeMux` like
+[gorilla/mux](http://www.gorillatoolkit.org/pkg/mux) which give you things like
+automatically pulling variables out of paths, easily asserting what http methods
+are allowed on an endpoint, and more. Most of these replacements will implement
+`http.Handler` like `http.ServeMux` does, and accept `http.Handler`s as
+arguments, and so are easy to use in conjunction with the rest of the things
+I'm going to talk about in this post.
+
+## Composability
+
+When I say that the `http` package is composable I mean that it is very easy to
+create re-usable pieces of code and glue them together into a new working
+application. The `http.Handler` interface is the way all pieces communicate with
+each other. Here's an example of where we use the same `http.Handler` to handle
+multiple endpoints, each slightly differently:
+
+```go
+package main
+
+import (
+	"fmt"
+	"log"
+	"net/http"
+)
+
+type numberDumper int
+
+func (n numberDumper) ServeHTTP(w http.ResponseWriter, r *http.Request) {
+	fmt.Fprintf(w, "Here's your number: %d\n", n)
+}
+
+func main() {
+	h := http.NewServeMux()
+
+	h.Handle("/one", numberDumper(1))
+	h.Handle("/two", numberDumper(2))
+	h.Handle("/three", numberDumper(3))
+	h.Handle("/four", numberDumper(4))
+	h.Handle("/five", numberDumper(5))
+
+	h.HandleFunc("/", func(w http.ResponseWriter, r *http.Request) {
+		w.WriteHeader(404)
+		fmt.Fprintln(w, "That's not a supported number!")
+	})
+
+	err := http.ListenAndServe(":9999", h)
+	log.Fatal(err)
+}
+```
+
+`numberDumper` implements `http.Handler`, and can be passed into the
+`http.ServeMux` multiple times to serve multiple endpoints. Here's it in action:
+
+```
+ ~ $ curl localhost:9999/one
+Here's your number: 1
+ ~ $ curl localhost:9999/five
+Here's your number: 5
+ ~ $ curl localhost:9999/bazillion
+That's not a supported number!
+```
+
+## Testing
+
+Testing http endpoints is extremely easy in Go, and doesn't even require you to
+actually listen on any ports! The `httptest` package provides a few handy
+utilities, including `NewRecorder` which implements `http.ResponseWriter` and
+allows you to effectively make an http request by calling `ServeHTTP` directly.
+Here's an example of a test for our previously implemented `numberDumper`,
+commented with what exactly is happening:
+
+```go
+package main
+
+import (
+	"fmt"
+	"net/http"
+	"net/http/httptest"
+	. "testing"
+)
+
+func TestNumberDumper(t *T) {
+	// We first create the http.Handler we wish to test
+	n := numberDumper(1)
+
+	// We create an http.Request object to test with. The http.Request is
+	// totally customizable in every way that a real-life http request is, so
+	// even the most intricate behavior can be tested
+	r, _ := http.NewRequest("GET", "/one", nil)
+
+	// httptest.Recorder implements the http.ResponseWriter interface, and as
+	// such can be passed into ServeHTTP to receive the response. It will act as
+	// if all data being given to it is being sent to a real client, when in
+	// reality it's being buffered for later observation
+	w := httptest.NewRecorder()
+
+	// Pass in our httptest.Recorder and http.Request to our numberDumper. At
+	// this point the numberDumper will act just as if it was responding to a
+	// real request
+	n.ServeHTTP(w, r)
+
+	// httptest.Recorder gives a number of fields and methods which can be used
+	// to observe the response made to our request. Here we check the response
+	// code
+	if w.Code != 200 {
+		t.Fatalf("wrong code returned: %d", w.Code)
+	}
+
+	// We can also get the full body out of the httptest.Recorder, and check
+	// that its contents are what we expect
+	body := w.Body.String()
+	if body != fmt.Sprintf("Here's your number: 1\n") {
+		t.Fatalf("wrong body returned: %s", body)
+	}
+
+}
+```
+
+In this way it's easy to create tests for your individual components that you
+are using to build your application, keeping the tests near to the functionality
+they're testing.
+
+Note: if you ever do need to spin up a test server in your tests, `httptest`
+also provides a way to create a server listening on a random open port for use
+in tests as well.
+
+## Middleware
+
+Serving endpoints is nice, but often there's functionality you need to run for
+*every* request before the actual endpoint's handler is run. For example, access
+logging. A middleware component is one which implements `http.Handler`, but will
+actually pass the request off to another `http.Handler` after doing some set of
+actions. The `http.ServeMux` we looked at earlier is actually an example of
+middleware, since it passes the request off to another `http.Handler` for actual
+processing. Here's an example of our previous example with some logging
+middleware:
+
+```go
+package main
+
+import (
+	"fmt"
+	"log"
+	"net/http"
+)
+
+type numberDumper int
+
+func (n numberDumper) ServeHTTP(w http.ResponseWriter, r *http.Request) {
+	fmt.Fprintf(w, "Here's your number: %d\n", n)
+}
+
+func logger(h http.Handler) http.Handler {
+	return http.HandlerFunc(func(w http.ResponseWriter, r *http.Request) {
+		log.Printf("%s requested %s", r.RemoteAddr, r.URL)
+		h.ServeHTTP(w, r)
+	})
+}
+
+func main() {
+	h := http.NewServeMux()
+
+	h.Handle("/one", numberDumper(1))
+	h.Handle("/two", numberDumper(2))
+	h.Handle("/three", numberDumper(3))
+	h.Handle("/four", numberDumper(4))
+	h.Handle("/five", numberDumper(5))
+
+	h.HandleFunc("/", func(w http.ResponseWriter, r *http.Request) {
+		w.WriteHeader(404)
+		fmt.Fprintln(w, "That's not a supported number!")
+	})
+
+	hl := logger(h)
+
+	err := http.ListenAndServe(":9999", hl)
+	log.Fatal(err)
+}
+```
+
+`logger` is a function which takes in an `http.Handler` called `h`, and returns
+a new `http.Handler` which, when called, will log the request it was called with
+and then pass off its arguments to `h`. To use it we pass in our
+`http.ServeMux`, so all incoming requests will first be handled by the logging
+middleware before being passed to the `http.ServeMux`.
+
+Here's an example log entry which is output when the `/five` endpoint is hit:
+
+```
+2015/06/30 20:15:41 [::1]:34688 requested /five
+```
+
+## Middleware chaining
+
+Being able to chain middleware together is an incredibly useful ability which we
+get almost for free, as long as we use the signature
+`func(http.Handler) http.Handler`. A middleware component returns the same type
+which is passed into it, so simply passing the output of one middleware
+component into the other is sufficient.
+
+However, more complex behavior with middleware can be tricky. For instance, what
+if you want a piece of middleware which takes in a parameter upon creation?
+Here's an example of just that, with a piece of middleware which will set a
+header and its value for all requests:
+
+```go
+package main
+
+import (
+	"fmt"
+	"log"
+	"net/http"
+)
+
+type numberDumper int
+
+func (n numberDumper) ServeHTTP(w http.ResponseWriter, r *http.Request) {
+	fmt.Fprintf(w, "Here's your number: %d\n", n)
+}
+
+func logger(h http.Handler) http.Handler {
+	return http.HandlerFunc(func(w http.ResponseWriter, r *http.Request) {
+		log.Printf("%s requested %s", r.RemoteAddr, r.URL)
+		h.ServeHTTP(w, r)
+	})
+}
+
+type headerSetter struct {
+	key, val string
+	handler  http.Handler
+}
+
+func (hs headerSetter) ServeHTTP(w http.ResponseWriter, r *http.Request) {
+	w.Header().Set(hs.key, hs.val)
+	hs.handler.ServeHTTP(w, r)
+}
+
+func newHeaderSetter(key, val string) func(http.Handler) http.Handler {
+	return func(h http.Handler) http.Handler {
+		return headerSetter{key, val, h}
+	}
+}
+
+func main() {
+	h := http.NewServeMux()
+
+	h.Handle("/one", numberDumper(1))
+	h.Handle("/two", numberDumper(2))
+	h.Handle("/three", numberDumper(3))
+	h.Handle("/four", numberDumper(4))
+	h.Handle("/five", numberDumper(5))
+
+	h.HandleFunc("/", func(w http.ResponseWriter, r *http.Request) {
+		w.WriteHeader(404)
+		fmt.Fprintln(w, "That's not a supported number!")
+	})
+
+	hl := logger(h)
+	hhs := newHeaderSetter("X-FOO", "BAR")(hl)
+
+	err := http.ListenAndServe(":9999", hhs)
+	log.Fatal(err)
+}
+```
+
+And here's the curl output:
+
+```
+ ~ $ curl -i localhost:9999/three
+ HTTP/1.1 200 OK
+ X-Foo: BAR
+ Date: Wed, 01 Jul 2015 00:39:48 GMT
+ Content-Length: 22
+ Content-Type: text/plain; charset=utf-8
+
+ Here's your number: 3
+
+```
+
+`newHeaderSetter` returns a function which accepts and returns an
+`http.Handler`. Calling that returned function with an `http.Handler` then gets
+you an `http.Handler` which will set the header given to `newHeaderSetter`
+before continuing on to the given `http.Handler`.
+
+This may seem like a strange way of organizing this; for this example the
+signature for `newHeaderSetter` could very well have looked like this:
+
+```
+func newHeaderSetter(key, val string, h http.Handler) http.Handler
+```
+
+And that implementation would have worked fine. But it would have been more
+difficult to compose going forward. In the next section I'll show what I mean.
+
+## Composing middleware with alice
+
+[Alice](https://github.com/justinas/alice) is a very simple and convenient
+helper for working with middleware using the function signature we've been using
+thusfar. Alice is used to create and use chains of middleware. Chains can even
+be appended to each other, giving even further flexibility. Here's our previous
+example with a couple more headers being set, but also using alice to manage the
+added complexity.
+
+```go
+package main
+
+import (
+	"fmt"
+	"log"
+	"net/http"
+
+	"github.com/justinas/alice"
+)
+
+type numberDumper int
+
+func (n numberDumper) ServeHTTP(w http.ResponseWriter, r *http.Request) {
+	fmt.Fprintf(w, "Here's your number: %d\n", n)
+}
+
+func logger(h http.Handler) http.Handler {
+	return http.HandlerFunc(func(w http.ResponseWriter, r *http.Request) {
+		log.Printf("%s requested %s", r.RemoteAddr, r.URL)
+		h.ServeHTTP(w, r)
+	})
+}
+
+type headerSetter struct {
+	key, val string
+	handler  http.Handler
+}
+
+func (hs headerSetter) ServeHTTP(w http.ResponseWriter, r *http.Request) {
+	w.Header().Set(hs.key, hs.val)
+	hs.handler.ServeHTTP(w, r)
+}
+
+func newHeaderSetter(key, val string) func(http.Handler) http.Handler {
+	return func(h http.Handler) http.Handler {
+		return headerSetter{key, val, h}
+	}
+}
+
+func main() {
+	h := http.NewServeMux()
+
+	h.Handle("/one", numberDumper(1))
+	h.Handle("/two", numberDumper(2))
+	h.Handle("/three", numberDumper(3))
+	h.Handle("/four", numberDumper(4))
+
+	fiveHS := newHeaderSetter("X-FIVE", "the best number")
+	h.Handle("/five", fiveHS(numberDumper(5)))
+
+	h.HandleFunc("/", func(w http.ResponseWriter, r *http.Request) {
+		w.WriteHeader(404)
+		fmt.Fprintln(w, "That's not a supported number!")
+	})
+
+	chain := alice.New(
+		newHeaderSetter("X-FOO", "BAR"),
+		newHeaderSetter("X-BAZ", "BUZ"),
+		logger,
+	).Then(h)
+
+	err := http.ListenAndServe(":9999", chain)
+	log.Fatal(err)
+}
+```
+
+In this example all requests will have the headers `X-FOO` and `X-BAZ` set, but
+the `/five` endpoint will *also* have the `X-FIVE` header set.
+
+## Fin
+
+Starting with a simple idea of an interface, the `http` package allows us to
+create for ourselves an incredibly useful and flexible (yet still rather simple)
+ecosystem for building web apps with re-usable components, all without breaking
+our static checks.
diff --git a/_posts/2015-11-21-happy-trees.md b/_posts/2015-11-21-happy-trees.md
new file mode 100644
index 0000000..2ac2850
--- /dev/null
+++ b/_posts/2015-11-21-happy-trees.md
@@ -0,0 +1,237 @@
+---
+layout: post
+title: Happy Trees
+---
+
+Source code related to this post is available [here](https://github.com/mediocregopher/happy-tree).
+
+This project was inspired by [this video](https://www.youtube.com/watch?v=_DpzAvb3Vk4),
+which you should watch first in order to really understand what's going on.
+
+My inspiration came from his noting that happification could be done on numbers
+in bases other than 10. I immediately thought of hexadecimal, base-16, since I'm
+a programmer and that's what I think of. I also was trying to think of how one
+would graphically represent a large happification tree, when I realized that
+hexadecimal numbers are colors, and colors graphically represent things nicely!
+
+## Colors
+
+Colors to computers are represented using 3-bytes, encompassing red, green, and
+blue. Each byte is represented by two hexadecimal digits, and they are appended
+together. For example `FF0000` represents maximum red (`FF`) added to no green
+and no blue. `FF5500` represents maximum red (`FF`), some green (`55`) and no
+blue (`00`), which when added together results in kind of an orange color.
+
+## Happifying colors
+
+In base 10, happifying a number is done by splitting its digits, squaring each
+one individually, and adding the resulting numbers. The principal works the same
+for hexadecimal numbers:
+
+```
+A4F
+A*A + 4*4 + F*F
+64 + 10 + E1
+155 // 341 in decimal
+```
+
+So if all colors are 6-digit hexadecimal numbers, they can be happified easily!
+
+```
+FF5500
+F*F + F*F + 5*5 + 5*5 + 0*0 + 0*0
+E1 + E1 + 19 + 19 + 0 + 0
+0001F4
+```
+
+So `FF5500` (an orangish color) happifies to `0001F4` (a darker blue). Since
+order of digits doesn't matter, `5F50F0` also happifies to `0001F4`. From this
+fact, we can make a tree (hence the happification tree). I can do this process
+on every color from `000000` (black) to `FFFFFF` (white), so I will!
+
+## Representing the tree
+
+So I know I can represent the tree using color, but there's more to decide on
+than that. The easy way to represent a tree would be to simply draw a literal
+tree graph, with a circle for each color and lines pointing to its parent and
+children. But this is boring, and also if I want to represent *all* colors the
+resulting image would be enormous and/or unreadable.
+
+I decided on using a hollow, multi-level pie-chart. Using the example
+of `000002`, it would look something like this:
+
+![An example of a partial multi-level pie chart](/img/happy-tree/partial.png)
+
+The inner arc represents the color `000002`. The second arc represents the 15
+different colors which happify into `000002`, each of them may also have their
+own outer arc of numbers which happify to them, and so on.
+
+This representation is nice because a) It looks cool and b) it allows the
+melancoils of the hexadecimals to be placed around the happification tree
+(numbers which happify into `000001`), which is convenient. It's also somewhat
+easier to code than a circle/branch based tree diagram.
+
+An important feature I had to implement was proportional slice sizes. If I were
+to give each child of a color an equal size on that arc's edge the image would
+simply not work.  Some branches of the tree are extremely deep, while others are
+very shallow. If all were given the same space, those deep branches wouldn't
+even be representable by a single pixel's width, and would simply fail to show
+up. So I implemented proportional slice sizes, where the size of every slice is
+determined to be proportional to how many total (recursively) children it has.
+You can see this in the above example, where the second level arc is largely
+comprised of one giant slice, with many smaller slices taking up the end.
+
+## First attempt
+
+My first attempt resulted in this image (click for 5000x5000 version):
+
+[![Result of first attempt](/img/happy-tree/happy-tree-atmp1-small.png)](/img/happy-tree/happy-tree-atmp1.png)
+
+The first thing you'll notice is that it looks pretty neat.
+
+The second thing you'll notice is that there's actually only one melancoil in
+the 6-digit hexadecimal number set. The innermost black circle is `000000` which
+only happifies to itself, and nothing else will happify to it (sad `000000`).
+The second circle represents `000001`, and all of its runty children. And
+finally the melancoil, comprised of:
+
+```
+00000D -> 0000A9 -> 0000B5 -> 000092 -> 000055 -> 00003 -> ...
+```
+
+The final thing you'll notice (or maybe it was the first, since it's really
+obvious) is that it's very blue. Non-blue colors are really only represented as
+leaves on their trees and don't ever really have any children of their own, so
+the blue and black sections take up vastly more space.
+
+This makes sense. The number which should generate the largest happification
+result, `FFFFFF`, only results in `000546`, which is primarily blue. So in effect
+all colors happify to some shade of blue.
+
+This might have been it, technically this is the happification tree and the
+melancoil of 6 digit hexadecimal numbers represented as colors. But it's also
+boring, and I wanted to do better.
+
+## Second attempt
+
+The root of the problem is that the definition of "happification" I used
+resulted in not diverse enough results. I wanted something which would give me
+numbers where any of the digits could be anything. Something more random.
+
+I considered using a hash instead, like md5, but that has its own problems.
+There's no gaurantee that any number would actually reach `000001`, which isn't
+required but it's a nice feature that I wanted. It also would be unlikely that
+there would be any melancoils that weren't absolutely gigantic.
+
+I ended up redefining what it meant to happify a hexadecimal number. Instead of
+adding all the digits up, I first split up the red, green, and blue digits into
+their own numbers, happified those numbers, and finally reassembled the results
+back into a single number. For example:
+
+```
+FF5500
+FF, 55, 00
+F*F + F*F, 5*5 + 5*5, 0*0 + 0*0
+1C2, 32, 00
+C23200
+```
+
+I drop that 1 on the `1C2`, because it has no place in this system. Sorry 1.
+
+Simply replacing that function resulted in this image (click for 5000x5000) version:
+
+[![Result of second attempt](/img/happy-tree/happy-tree-atmp2-small.png)](/img/happy-tree/happy-tree-atmp2.png)
+
+The first thing you notice is that it's so colorful! So that goal was achieved.
+
+The second thing you notice is that there's *significantly* more melancoils.
+Hundreds, even. Here's a couple of the melancoils (each on its own line):
+
+```
+00000D -> 0000A9 -> 0000B5 -> 000092 -> 000055 -> 000032 -> ...
+000D0D -> 00A9A9 -> 00B5B5 -> 009292 -> 005555 -> 003232 -> ...
+0D0D0D -> A9A9A9 -> B5B5B5 -> 929292 -> 555555 -> 323232 -> ...
+0D0D32 -> A9A90D -> B5B5A9 -> 9292B5 -> 555592 -> 323255 -> ...
+...
+```
+
+And so on. You'll notice the first melancoil listed is the same as the one from
+the first attempt. You'll also notice that the same numbers from the that
+melancoil are "re-used" in the rest of them as well. The second coil listed is
+the same as the first, just with the numbers repeated in the 3rd and 4th digits.
+The third coil has those numbers repeated once more in the 1st and 2nd digits.
+The final coil is the same numbers, but with the 5th and 6th digits offset one
+place in the rotation.
+
+The rest of the melancoils in this attempt work out to just be every conceivable
+iteration of the above. This is simply a property of the algorithm chosen, and
+there's not a whole lot we can do about it.
+
+## Third attempt
+
+After talking with [Mr. Marco](/members/#marcopolo) about the previous attempts
+I got an idea that would lead me towards more attempts. The main issue I was
+having in coming up with new happification algorithms was figuring out what to
+do about getting a number greater than `FFFFFF`. Dropping the leading digits
+just seemed.... lame.
+
+One solution I came up with was to simply happify again. And again, and again.
+Until I got a number less than or equal to `FFFFFF`.
+
+With this new plan, I could increase the power by which I'm raising each
+individual digit, and drop the strategy from the second attempt of splitting the
+number into three parts. In the first attempt I was doing happification to the
+power of 2, but what if I wanted to happify to the power of 6? It would look
+something like this (starting with the number `34BEEF`):
+
+```
+34BEEF
+3^6 + 4^6 + B^6 + E^6 + E^6 + E^6 + F^6
+2D9 + 1000 + 1B0829 + 72E440 + 72E440 + ADCEA1
+1AEB223
+
+1AEB223 is greater than FFFFFF, so we happify again
+
+1^6 + A^6 + E^6 + B^6 + 2^6 + 2^6 + 3^6
+1 + F4240 + 72E440 + 1B0829 + 40 + 40 + 2D9
+9D3203
+```
+
+So `34BEEF` happifies to `9D3203`, when happifying to the power of 6.
+
+As mentioned before the first attempt in this blog was the 2nd power tree,
+here's the trees for the 3rd, 4th, 5th, and 6th powers (each image is a link to
+a larger version):
+
+3rd power:
+[![Third attempt, 3rd power](/img/happy-tree/happy-tree-atmp3-pow3-small.png)](/img/happy-tree/happy-tree-atmp3-pow3.png)
+
+4th power:
+[![Third attempt, 4th power](/img/happy-tree/happy-tree-atmp3-pow4-small.png)](/img/happy-tree/happy-tree-atmp3-pow4.png)
+
+5th power:
+[![Third attempt, 5th power](/img/happy-tree/happy-tree-atmp3-pow5-small.png)](/img/happy-tree/happy-tree-atmp3-pow5.png)
+
+6th power:
+[![Third attempt, 6th power](/img/happy-tree/happy-tree-atmp3-pow6-small.png)](/img/happy-tree/happy-tree-atmp3-pow6.png)
+
+A couple things to note:
+
+* 3-5 are still very blue. It's not till the 6th power that the distribution
+  becomes random enough to become very colorful.
+
+* Some powers have more coils than others. Power of 3 has a lot, and actually a
+  lot of them aren't coils, but single narcissistic numbers. Narcissistic
+  numbers are those which happify to themselves. `000000` and `000001` are
+  narcissistic numbers in all powers, power of 3 has quite a few more.
+
+* 4 looks super cool.
+
+Using unsigned 64-bit integers I could theoretically go up to the power of 15.
+But I hit a roadblock at power of 7, in that there's actually a melancoil which
+occurs whose members are all greater than `FFFFFF`. This means that my strategy
+of repeating happifying until I get under `FFFFFF` doesn't work for any numbers
+which lead into that coil.
+
+ All images linked to in this post are licensed under the [Do what the fuck you
+ want to public license](http://www.wtfpl.net/txt/copying/).
diff --git a/_posts/2015-3-11-rabbit-hole.md b/_posts/2015-3-11-rabbit-hole.md
new file mode 100644
index 0000000..190408c
--- /dev/null
+++ b/_posts/2015-3-11-rabbit-hole.md
@@ -0,0 +1,164 @@
+---
+layout: post
+title: Rabbit Hole
+---
+
+We've begun rolling out [SkyDNS][skydns] at my job, which has been pretty neat.
+We're basing a couple future projects around being able to use it, and it's made
+dynamic configuration and service discovery nice and easy.
+
+This post chronicles catching a bug because of our switch to SkyDNS, and how we
+discover its root cause. I like to call these kinds of bugs "rabbit holes"; they
+look shallow at first, but anytime you make a little progress forward a little
+more is always required, until you discover the ending somewhere totally
+unrelated to the start.
+
+## The Bug
+
+We are seeing *tons* of these in the SkyDNS log:
+
+```
+[skydns] Feb 20 17:21:15.168 INFO      | no nameservers defined or name too short, can not forward
+```
+
+I fire up tcpdump to see if I can see anything interesting, and sure enough run
+across a bunch of these:
+
+```
+# tcpdump -vvv -s 0 -l -n port 53
+tcpdump: listening on eth0, link-type EN10MB (Ethernet), capture size 65535 bytes
+    ...
+    $fen_ip.50257 > $skydns_ip.domain: [udp sum ok] 16218+ A? unknown. (25)
+    $fen_ip.27372 > $skydns_ip.domain: [udp sum ok] 16218+ A? unknown. (25)
+    $fen_ip.35634 > $skydns_ip.domain: [udp sum ok] 59227+ A? unknown. (25)
+    $fen_ip.64363 > $skydns_ip.domain: [udp sum ok] 59227+ A? unknown. (25)
+```
+
+It appears that some of our front end nodes (FENs) are making tons of DNS
+fequests trying to find the A record of `unknown`. Something on our FENs is
+doing something insane and is breaking.
+
+## The FENs
+
+Hopping over to my favorite FEN we're able to see the packets in question
+leaving on a tcpdump as well, but that's not helpful for finding the root cause.
+We have lots of processes running on the FENs and any number of them could be
+doing something crazy.
+
+We fire up sysdig, which is similar to systemtap and strace in that it allows
+you to hook into the kernel and view various kernel activites in real time, but
+it's easier to use than both. The following command dumps all UDP packets being
+sent and what process is sending them:
+
+```
+# sysdig fd.l4proto=udp
+...
+2528950 22:17:35.260606188 0 php-fpm (21477) < connect res=0 tuple=$fen_ip:61173->$skydns_ip:53
+2528961 22:17:35.260611327 0 php-fpm (21477) > sendto fd=102(<4u>$fen_ip:61173->$skydns_ip:53) size=25 tuple=NULL
+2528991 22:17:35.260631917 0 php-fpm (21477) < sendto res=25 data=.r...........unknown.....
+2530470 22:17:35.261879032 0 php-fpm (21477) > ioctl fd=102(<4u>$fen_ip:61173->$skydns_ip:53) request=541B argument=7FFF82DC8728
+2530472 22:17:35.261880574 0 php-fpm (21477) < ioctl res=0
+2530474 22:17:35.261881226 0 php-fpm (21477) > recvfrom fd=102(<4u>$fen_ip:61173->$skydns_ip:53) size=1024
+2530476 22:17:35.261883424 0 php-fpm (21477) < recvfrom res=25 data=.r...........unknown..... tuple=$skydns_ip:53->$fen_ip:61173
+2530485 22:17:35.261888997 0 php-fpm (21477) > close fd=102(<4u>$fen_ip:61173->$skydns_ip:53)
+2530488 22:17:35.261892626 0 php-fpm (21477) < close res=0
+```
+
+Aha! We can see php-fpm is requesting something over udp with the string
+`unknown` in it. We've now narrowed down the guilty process, the rest should be
+easy right?
+
+## Which PHP?
+
+Unfortunately we're a PHP shop; knowing that php-fpm is doing something on a FEN
+narrows down the guilty codebase little. Taking the FEN out of our load-balancer
+stops the requests for `unknown`, so we *can* say that it's some user-facing
+code that is the culprit. Our setup on the FENs involves users hitting nginx
+for static content and nginx proxying PHP requests back to php-fpm. Since all
+our virtual domains are defined in nginx, we are able to do something horrible.
+
+On the particular FEN we're on we make a guess about which virtual domain the
+problem is likely coming from (our main app), and proxy all traffic from all
+other domains to a different FEN. We still see requests for `unknown` leaving
+the box, so we've narrowed the problem down a little more.
+
+## The Despair
+
+Nothing in our code is doing any direct DNS calls as far as we can find, and we
+don't see any places PHP might be doing it for us. We have lots of PHP
+extensions in place, all written in C and all black boxes; any of them could be
+the culprit. Grepping through the likely candidates' source code for the string
+`unknown` proves fruitless.
+
+We try xdebug at this point. xdebug is a profiler for php which will create
+cachegrind files for the running code. With cachegrind you can see every
+function which was ever called, how long spent within each function, a full
+call-graph, and lots more. Unfortunately xdebug outputs cachegrind files on a
+per-php-fpm-process basis, and overwrites the previous file on each new request.
+So xdebug is pretty much useless, since what is in the cachegrind file isn't
+necessarily what spawned the DNS request.
+
+## Gotcha (sorta)
+
+We turn back to the tried and true method of dumping all the traffic using
+tcpdump and perusing through that manually.
+
+What we find is that nearly everytime there is a DNS request for `unknown`, if
+we scroll up a bit there is (usually) a particular request to memcache. The
+requested key is always in the style of `function-name:someid:otherstuff`. When
+looking in the code around that function name we find this ominous looking call:
+
+```php
+$ipAddress = getIPAddress();
+$geoipInfo = getCountryInfoFromIP($ipAddress);
+```
+
+This points us in the right direction. On a hunch we add some debug
+logging to print out the `$ipAddress` variable, and sure enough it comes back as
+`unknown`. AHA!
+
+So what we surmise is happening is that for some reason our geoip extension,
+which we use to get the location data of an IP address and which
+`getCountryInfoFromIP` calls, is seeing something which is *not* an IP address
+and trying to resolve it.
+
+## Gotcha (for real)
+
+So the question becomes: why are we getting the string `unknown` as an IP
+address?
+
+Adding some debug logging around the area we find before showed that
+`$_SERVER['REMOTE_ADDR']`, which is the variable populated with the IP address
+of the client, is sometimes `unknown`. We guess that this has something to do
+with some magic we are doing on nginx's side to populate `REMOTE_ADDR` with the
+real IP address of the client in the case of them going through a proxy.
+
+Many proxies send along the header `X-Forwarded-For` to indicate the real IP of
+the client they're proxying for, otherwise the server would only see the proxy's
+IP. In our setup I decided that in those cases we should set the `REMOTE_ADDR`
+to the real client IP so our application logic doesn't even have to worry about
+it. There are a couple problems with this which render it a bad decision, one
+being that if some misbahaving proxy was to, say, start sending
+`X-Forwarded-For: unknown` then some written applications might mistake that to
+mean the client's IP is `unknown`.
+
+## The Fix
+
+The fix here was two-fold:
+
+1) We now always set `$_SERVER['REMOTE_ADDR']` to be the remote address of the
+requests, regardless of if it's a proxy, and also send the application the
+`X-Forwarded-For` header to do with as it pleases.
+
+2) Inside our app we look at all the headers sent and do some processing to
+decide what the actual client IP is. PHP can handle a lot more complex logic
+than nginx can, so we can do things like check to make sure the IP is an IP, and
+also that it's not some NAT'd internal ip, and so forth.
+
+And that's it. From some weird log messages on our DNS servers to an nginx
+mis-configuration on an almost unrelated set of servers, this is one of those
+strange bugs that never has a nice solution and goes unsolved for a long time.
+Spending the time to dive down the rabbit hole and find the answer is often
+tedious, but also often very rewarding.
+
+[skydns]: https://github.com/skynetservices/skydns
diff --git a/img/happy-tree/happy-tree-atmp1-small.png b/img/happy-tree/happy-tree-atmp1-small.png
new file mode 100644
index 0000000..adcf267
--- /dev/null
+++ b/img/happy-tree/happy-tree-atmp1-small.png
diff --git a/img/happy-tree/happy-tree-atmp1.png b/img/happy-tree/happy-tree-atmp1.png
new file mode 100644
index 0000000..5a9baaf
--- /dev/null
+++ b/img/happy-tree/happy-tree-atmp1.png
diff --git a/img/happy-tree/happy-tree-atmp2-small.png b/img/happy-tree/happy-tree-atmp2-small.png
new file mode 100644
index 0000000..694858f
--- /dev/null
+++ b/img/happy-tree/happy-tree-atmp2-small.png
diff --git a/img/happy-tree/happy-tree-atmp2.png b/img/happy-tree/happy-tree-atmp2.png
new file mode 100644
index 0000000..60a2b16
--- /dev/null
+++ b/img/happy-tree/happy-tree-atmp2.png
diff --git a/img/happy-tree/happy-tree-atmp3-pow3-small.png b/img/happy-tree/happy-tree-atmp3-pow3-small.png
new file mode 100644
index 0000000..02dfd2d
--- /dev/null
+++ b/img/happy-tree/happy-tree-atmp3-pow3-small.png
diff --git a/img/happy-tree/happy-tree-atmp3-pow3.png b/img/happy-tree/happy-tree-atmp3-pow3.png
new file mode 100644
index 0000000..710a0a0
--- /dev/null
+++ b/img/happy-tree/happy-tree-atmp3-pow3.png
diff --git a/img/happy-tree/happy-tree-atmp3-pow4-small.png b/img/happy-tree/happy-tree-atmp3-pow4-small.png
new file mode 100644
index 0000000..311718d
--- /dev/null
+++ b/img/happy-tree/happy-tree-atmp3-pow4-small.png
diff --git a/img/happy-tree/happy-tree-atmp3-pow4.png b/img/happy-tree/happy-tree-atmp3-pow4.png
new file mode 100644
index 0000000..b82406e
--- /dev/null
+++ b/img/happy-tree/happy-tree-atmp3-pow4.png
diff --git a/img/happy-tree/happy-tree-atmp3-pow5-small.png b/img/happy-tree/happy-tree-atmp3-pow5-small.png
new file mode 100644
index 0000000..87b7ced
--- /dev/null
+++ b/img/happy-tree/happy-tree-atmp3-pow5-small.png
diff --git a/img/happy-tree/happy-tree-atmp3-pow5.png b/img/happy-tree/happy-tree-atmp3-pow5.png
new file mode 100644
index 0000000..bcea6ad
--- /dev/null
+++ b/img/happy-tree/happy-tree-atmp3-pow5.png
diff --git a/img/happy-tree/happy-tree-atmp3-pow6-small.png b/img/happy-tree/happy-tree-atmp3-pow6-small.png
new file mode 100644
index 0000000..69742f2
--- /dev/null
+++ b/img/happy-tree/happy-tree-atmp3-pow6-small.png
diff --git a/img/happy-tree/happy-tree-atmp3-pow6.png b/img/happy-tree/happy-tree-atmp3-pow6.png
new file mode 100644
index 0000000..6571ce2
--- /dev/null
+++ b/img/happy-tree/happy-tree-atmp3-pow6.png
diff --git a/img/happy-tree/partial.png b/img/happy-tree/partial.png
new file mode 100644
index 0000000..59a9d3d
--- /dev/null
+++ b/img/happy-tree/partial.png