diff options
Diffstat (limited to '_posts/2019-08-02-program-structure-and-composability.md')
| -rw-r--r-- | _posts/2019-08-02-program-structure-and-composability.md | 582 |
1 files changed, 582 insertions, 0 deletions
diff --git a/_posts/2019-08-02-program-structure-and-composability.md b/_posts/2019-08-02-program-structure-and-composability.md new file mode 100644 index 0000000..54b0b76 --- /dev/null +++ b/_posts/2019-08-02-program-structure-and-composability.md @@ -0,0 +1,582 @@ +--- +title: >- + Program Structure and Composability +description: >- + Discussing the nature of program structure, the problems presented by + complex structures, and a pattern which helps in solving those problems. +hide: true +--- + +## Part 0: Introduction + +This post is focused on a concept I call "program structure", which I will try +to shed some light on before discussing complex program structures, then +discussing why complex structures can be problematic to deal with, and finally +discussing a pattern for dealing with those problems. + +My background is as a backend engineer working on large projects that have had +many moving parts; most had multiple programs interacting with each other, using +many different databases in various contexts, and facing large amounts of load +from millions of users. Most of this post will be framed from my perspective, +and will present problems in the way I have experienced them. I believe, +however, that the concepts and problems I discuss here are applicable to many +other domains, and I hope those with a foot in both backend systems and a second +domain can help to translate the ideas between the two. + +Also note that I will be using Go as my example language, but none of the +concepts discussed here are specific to Go. To that end, I've decided to favor +readable code over "correct" code, and so have elided things that most gophers +hold near-and-dear, such as error checking and proper documentation, in order to +make the code as accessible as possible to non-gophers as well. As with before, +I trust someone with a foot in Go and another language can translate help me +translate between the two. + +## Part 1: Program Structure + +In this section I will discuss the difference between directory and program +structure, show how global state is antithetical to compartmentalization (and +therefore good program structure), and finally discuss a more effective way to +think about program structure. + +### Directory Structure + +For a long time I thought about program structure in terms of the hierarchy +present in the filesystem. In my mind, a program's structure looked like this: + +``` +// The directory structure of a project called gobdns. +src/ + config/ + dns/ + http/ + ips/ + persist/ + repl/ + snapshot/ + main.go +``` + +What I grew to learn was that this conflation of "program structure" with +"directory structure" is ultimately unhelpful. While can't be denied that every +program has a directory structure (and if not, it ought to), this does not mean +that the way the program looks in a filesystem in any way corresponds to how it +looks in our mind's eye. + +The most notable way to show this is to consider a library package. Here is the +structure of a simple web-app which uses redis (my favorite database) as a +backend: + +``` +src/ + redis/ + http/ + main.go +``` + +If I were to ask you, based on that directory strucure, what the program does, +in the most abstract terms, you might say something like: "The program +establishes an http server which listens for requests. It also establishes a +connection to the redis server. The program then interacts with redis in +different ways, based on the http requests which are received on the server." + +And that would be a good guess. Here's a diagram which depicts the program +structure, wherein the root node, `main.go`, takes in requests from `http` and +processes them using `redis`. + +{% include image.html + dir="program-structure" file="diag1.jpg" width=519 + descr="Example 1" + %} + +This is certainly a viable guess for how a program with that directory structure +operates, but consider another answer: "A component of the program called +`server` establishes an http server which listens for requests. `server` also +establishes a connection to a redis server. `server` then interacts with that +redis connection in different ways, based on the http requests which are +received on the http server. Additionally, `server` tracks statistics about +these interactions and makes them available to other components. The root +component of the program establishes a connection to a second redis server, and +stores those statistics in that redis server." Here's another diagram to depict +_that_ program. + +{% include image.html + dir="program-structure" file="diag2.jpg" width=712 + descr="Example 2" + %} + +The directory structure could apply to either description; `redis` is just a +library which allows for interacting with a redis server, but it doesn't specify +_which_ server, or _how many_. And those are extremely important factors which +are definitely reflected in our concept of the program's structure, and yet not +in the directory structure. **What the directory structure reflects are the +different _kinds_ of components available to use, but it does not reflect how a +program will use those components.** + +### Global State vs Compartmentalization + +The directory-centric view of structure often leads to the use of global +singletons to manage access to external resources like RPC servers and +databases. In examples 1 and 2 the `redis` library might contain code which +looks something like: + +```go +// A mapping of connection names to redis connections. +var globalConns = map[string]*RedisConn{} + +func Get(name string) *RedisConn { + if globalConns[name] == nil { + globalConns[name] = makeRedisConnection(name) + } + return globalConns[name] +} +``` + +Even though this pattern would work, it breaks with our conception of the +program structure in more complexes cases like example 2. Rather than the +`redis` component being owned by the `server` component, which actually uses it, +it would be practically owned by _all_ components, since all are able to use it. +Compartmentalization has been broken, and can only be held together through +sheer human discipline. + +**This is the problem with all global state. It's shareable amongst all components +of a program, and so is accountable to none of them.** One must look at an +entire codebase to understand how a globally held component is used, which might +not even be possible for a large codebase. And so the maintainers of these +shared components rely entirely on the discipline of their fellow coders when +making changes, usually discovering where that discipline broke down once the +changes have been pushed live. + +Global state also makes it easier for disparate programs/components to share +datastores for completely unrelated tasks. In example 2, rather than creating a +new redis instance for the root component's statistics storage, the coder might +have instead said "well, there's already a redis instance available, I'll just +use that." And so compartmentalization would have been broken further. Perhaps +the two instances _could_ be coalesced into the same one, for the sake of +resource efficiency, but that decision would be better made at runtime via the +configuration of the program, rather than being hardcoded into the code. + +From the perspective of team management, global state-based patterns do nothing +except slow teams down. The person/team responsible for maintaining the central +library in which shared components live (`redis`, in the above examples) becomes +the bottleneck for creating new instances for new components, which will further +lead to re-using existing instances rather than creating new ones, further +breaking compartmentalization. The person/team responsible for the central +library often finds themselves as the maintainers of the shared resource as +well, rather than the team actually using it. + +### Component Structure + +So what does proper program structure look like? In my mind the structure of a +program is a hierarchy of components, or, in other words, a tree. The leaf nodes +of the tree are almost _always_ IO related components, e.g. database +connections, RPC server frameworks or clients, message queue consumers, etc... +The non-leaf nodes will _generally_ be components which bring together the +functionalities of their children in some useful way, though they may also have +some IO functionality of their own. + +Let's look at an even more complex structure, still only using the `redis` and +`http` component types: + +{% include image.html + dir="program-structure" file="diag3.jpg" width=729 + descr="Example 3" + %} + +This component structure contains the addition of the `debug` component. Clearly +the `http` and `redis` components are reusable in different contexts, but for +this example the `debug` endpoint is as well. It creates a separate http server +which can be queried to perform runtime debugging of the program, and can be +tacked onto virtually any program. The `rest-api` component is specific to this +program and therefore not reusable. Let's dive into it a bit to see how it might +be implemented: + +```go +// RestAPI is very much not thread-safe, hopefully it doesn't have to handle +// more than one request at once. +type RestAPI struct { + redisConn *redis.RedisConn + httpSrv *http.Server + + // Statistics exported for other components to see + RequestCount int + FooRequestCount int + BarRequestCount int +} + +func NewRestAPI() *RestAPI { + r := new(RestAPI) + r.redisConn := redis.NewConn("127.0.0.1:6379") + + // mux will route requests to different handlers based on their URL path. + mux := http.NewServeMux() + mux.HandleFunc("/foo", r.fooHandler) + mux.HandleFunc("/bar", r.barHandler) + r.httpSrv := http.NewServer(mux) + + // Listen for requests and serve them in the background. + go r.httpSrv.Listen(":8000") + + return r +} + +func (r *RestAPI) fooHandler(rw http.ResponseWriter, r *http.Request) { + r.redisConn.Command("INCR", "fooKey") + r.RequestCount++ + r.FooRequestCount++ +} + +func (r *RestAPI) barHandler(rw http.ResponseWriter, r *http.Request) { + r.redisConn.Command("INCR", "barKey") + r.RequestCount++ + r.BarRequestCount++ +} +``` + +As can be seen, `rest-api` coalesces `http` and `redis` into a simple REST-like +api, using pre-made library components. `main.go`, the root component, does much +the same: + +```go +func main() { + // Create debug server and start listening in the background + debugSrv := debug.NewServer() + + // Set up the RestAPI, this will automatically start listening + restAPI := NewRestAPI() + + // Create another redis connection and use it to store statistics + statsRedisConn := redis.NewConn("127.0.0.1:6380") + for { + time.Sleep(1 * time.Second) + statsRedisConn.Command("SET", "numReqs", restAPI.RequestCount) + statsRedisConn.Command("SET", "numFooReqs", restAPI.FooRequestCount) + statsRedisConn.Command("SET", "numBarReqs", restAPI.BarRequestCount) + } +} +``` + +One thing which is clearly missing in this program is proper configuration, +whether from command-line, environment variables, etc.... As it stands, all +configuration parameters, such as the redis addresses and http listen addresses, +are hardcoded. Proper configuration actually ends up being somewhat difficult, +as the ideal case would be for each component to set up its own configuration +variables, without its parent needing to be aware. For example, `redis` could +set up `addr` and `pool-size` parameters. The problem is that there are two +`redis` components in the program, and their parameters would therefore conflict +with each other. An elegant solution to this problem is discussed in the next +section. + +## Part 2: Components, Configuration, and Runtime + +The key to the configuration problem is to recognize that, even if there are two +of the same component in a program, they can't occupy the same place in the +program's structure. In the above example there are two `http` components, one +under `rest-api` and the other under `debug`. Since the structure is represented +as a tree of components, the "path" of any node in the tree uniquely represents +it in the structure. For example, the two `http` components in the previous +example have these paths: + +``` +root -> rest-api -> http +root -> debug -> http +``` + +If each component were to know its place in the component tree, then it would +easily be able to ensure that its configuration and initialization didn't +conflict with other components of the same type. If the `http` component sets up +a command-line parameter to know what address to listen on, the two `http` +components in that program would set up: + +``` +--rest-api-listen-addr +--debug-listen-addr +``` + +So how can we enable each component to know its path in the component structure? +To answer this we'll have to take a detour through a type, called `Component`. + +### Component and Configuration + +The `Component` type is a made up type (though you'll be able to find an +implementation of it at the end of this post). It has a single primary purpose, +and that is to convey the program's structure to new components. + +To see how this is done, let's look at a couple of `Component`'s methods: + +```go +// Package mcmp + +// New returns a new Component which has no parents or children. It is therefore +// the root component of a component hierarchy. +func New() *Component + +// Child returns a new child of the called upon Component. +func (*Component) Child(name string) *Component + +// Path returns the Component's path in the component hierarchy. It will return +// an empty slice if the Component is the root component. +func (*Component) Path() []string +``` + + +`Child` is used to create a new `Component`, corresponding to a new child node +in the component structure, and `Path` is used retrieve the path of any +`Component` within that structure. For the sake of keeping the examples simple +let's pretend these functions have been implemented in a package called `mcmp`. +Here's an example of how `Component` might be used in the `redis` component's +code: + +```go +// Package redis + +func NewConn(cmp *mcmp.Component, defaultAddr string) *RedisConn { + cmp = cmp.Child("redis") + paramPrefix := strings.Join(cmp.Path(), "-") + + addrParam := flag.String(paramPrefix+"-addr", defaultAddr, "Address of redis instance to connect to") + // finish setup + + return redisConn +} +``` + +In our above example, the two `redis` components' parameters would be: + +``` +// This first parameter is for the stats redis, whose parent is the root and +// therefore doesn't have a prefix. Perhaps stats should be broken into its own +// component in order to fix this. +--redis-addr +--rest-api-redis-addr +``` + +`Component` definitely makes it easier to instantiate multiple redis components +in our program, since it allows them to know their place in the component +structure. + +Having to construct the prefix for the parameters ourselves is pretty annoying +though, so let's introduce a new package, `mcfg`, which acts like `flag` but is +aware of `Component`. Then `redis.NewConn` is reduced to: + +```go +// Package redis + +func NewConn(cmp *mcmp.Component, defaultAddr string) *RedisConn { + cmp = cmp.Child("redis") + addrParam := flag.String(cmp, "-addr", defaultAddr, "Address of redis instance to connect to") + // finish setup + + return redisConn +} +``` + +Easy-peazy. + +#### But What About Parse? + +Sharp-eyed gophers will notice that there's a key piece missing: When is +`flag.Parse`, or its `mcfg` counterpart, called? When does `addrParam` actually +get populated? You can't use the redis connection until that happens, but that +can't happen inside `redis.NewConn` because there might be other components +after `redis.NewConn` which want to set up parameters. To illustrate the +problem, let's look at a simple program which wants to set up two `redis` +components: + +```go +func main() { + // Create the root Component, an empty Component. + cmp := mcmp.New() + + // Create the Components for two sub-components, foo and bar. + cmpFoo := cmp.Child("foo") + cmpBar := cmp.Child("bar") + + // Now we want to try to create a redis sub-component for each component. + + // This will set up the parameter "--foo-redis-addr", but bar hasn't had a + // chance to set up its corresponding parameter, so the command-line can't + // be parsed yet. + fooRedis := redis.NewConn(cmpFoo, "127.0.0.1:6379") + + // This will set up the parameter "--bar-redis-addr", but, as mentioned + // before, redis.NewConn can't parse command-line. + barRedis := redis.NewConn(cmpBar, "127.0.0.1:6379") + + // If the command-line is parsed here, then how can fooRedis and barRedis + // have been created yet? It's only _after_ this point that `fooRedis` and + // `barRedis` could possibly be usable. + mcfg.Parse() +} +``` + +We will solve this problem in the next section. + +### Instantiation vs Initialization + +Let's break down `redis.NewConn` into two phases: instantiation and initialization. +Instantiation refers to creating the component on the component structure and +having it declare what it needs in order to initialize (e.g. configuration +parameters). During instantiation nothing external to the program is performed; +no IO, no reading of the command-line, no logging, etc... All that's happened is +that the empty template of a `redis` component has been created. + +Initialization is the phase when that template is filled in. Configuration +parameters are read, startup actions like the creation of database connections +are performed, and logging is output for informational and debugging purposes. + +The key to making effective use of this dichotemy is to allow _all_ components +to instantiate themselves before they initialize themselves. By doing this we +can ensure that, for example, all components have had the chance to declare +their configuration parameters before configuration parsing is done. + +So let's modify `redis.NewConn` so that it follows this dichotemy. It makes +sense to leave instantiation related code where it is, but we need a mechanism +by which we can declare initialization code before actually calling it. For +this, I will introduce the idea of a "hook". + +#### But First: Augment Component + +In order to support hooks, however, `Component` will need to be augmented with +a few new methods. Right now it can only carry with it information about the +component structure, but here we will add the ability to carry arbitrary +key/value information as well: + +```go +// Package mcmp + +// SetValue sets the given key to the given value on the Component, overwriting +// any previous value for that key. +func (*Component) SetValue(key, value interface{}) + +// Value returns the value which has been set for the given key, or nil if the +// key was never set. +func (*Component) Value(key interface{}) interface{} + +// Children returns the Component's children in the order they were created. +func (*Component) Children() []*Component +``` + +The final method allows us to, starting at the root `Component`, traverse the +component structure, interacting with each `Component`'s key/value store. This +will be useful for implementing hooks. + +#### Hooks + +A hook is, simply a function which will run later. We will declare a new +package, calling it `mrun`, and say that it has two new functions: + +```go +// Package mrun + +// InitHook registers the given hook to the given Component. +func InitHook(cmp *mcmp.Component, hook func()) + +// Init runs all hooks registered using InitHook. Hooks are run in the order +// they were registered. +func Init(cmp *mcmp.Component) +``` + +With these two functions we are able to defer the initialization phase of +startup by using the same `Component`s we were passing around for the purpose of +denoting component structure. + +Now, with these few extra pieces of functionality in place, let's reconsider the +most recent example, and make a program which creates two redis components which +exist independently of each other: + +```go +// Package redis + +// NOTE that NewConn has been renamed to InstConn, to reflect that the returned +// *RedisConn is merely instantiated, not initialized. + +func InstConn(cmp *mcmp.Component, defaultAddr string) *RedisConn { + cmp = cmp.Child("redis") + + // we instantiate an empty RedisConn instance and parameters for it. Neither + // has been initialized yet. They will remain empty until initialization has + // occurred. + redisConn := new(RedisConn) + addrParam := mcfg.String(cmp, "-addr", defaultAddr, "Address of redis instance to connect to") + + mrun.InitHook(cmp, func() { + // This hook will run after parameter initialization has happened, and + // so addrParam will be usable. Once this hook as run, redisConn will be + // usable as well. + *redisConn = makeRedisConnection(*addrParam) + }) + + // Now that cmp has had configuration parameters and intialization hooks + // set into it, return the empty redisConn instance back to the parent. + return redisConn +} +``` + +```go +// Package main + +func main() { + // Create the root Component, an empty Component. + cmp := mcmp.New() + + // Create the Components for two sub-components, foo and bar. + cmpFoo := cmp.Child("foo") + cmpBar := cmp.Child("bar") + + // Add redis components to each of the foo and bar sub-components. + redisFoo := redis.InstConn(cmpFoo, "127.0.0.1:6379") + redisBar := redis.InstConn(cmpBar, "127.0.0.1:6379") + + // Parse will descend into the Component and all of its children, + // discovering all registered configuration parameters and filling them from + // the command-line. + mcfg.Parse(cmp) + + // Now that configuration parameters have been initialized, run the Init + // hooks for all Components. + mrun.Init(cmp) + + // At this point the redis components have been fully initialized and may be + // used. For this example we'll copy all keys from one to the other. + keys := redisFoo.Command("KEYS", "*") + for i := range keys { + val := redisFoo.Command("GET", keys[i]) + redisBar.Command("SET", keys[i], val) + } +} +``` + +## Conclusion + +While the examples given here are fairly simplistic, the pattern itself is quite +powerful. Codebases naturally accumulate small, domain specific behaviors and +optimizations over time, especially around the IO components of the program. +Databases are used with specific options that an organization finds useful, +logging is performed in particular places, metrics are counted around certain +pieces of code, etc... + +By programming with component structure in mind we are able to keep these +optimizations while also keeping the clarity and compartmentalization of the +code in-tact. We are able to keep our code flexible and configurable, while also +re-usable and testable. And the simplicity of the tools involved means it can be +extended and retrofitted for nearly any situation or use-case. + +Overall, it's a powerful pattern that I've found myself unable to do without +once I began using it. + +### Implementation + +As a final note, you can find an example implementation of the packages +described in this post here: + +* [mcmp](https://godoc.org/github.com/mediocregopher/mediocre-go-lib/mcmp) +* [mcfg](https://godoc.org/github.com/mediocregopher/mediocre-go-lib/mcfg) +* [mrun](https://godoc.org/github.com/mediocregopher/mediocre-go-lib/mrun) + +The packages are not stable and are likely to change frequently. You'll also +find that they have been extended quite a bit from the simple descriptions found +here, based on what I've found useful as I've implemented programs using +component structures. With these two points in mind, I would encourage you to +look in and take whatever functionality you find useful for yourself, and not +use the packages directly. The core pieces are not different from what has been +described in this post. |