From f3340ae5f4ac6c60823bf4d14e1fcdbeaaec353c Mon Sep 17 00:00:00 2001 From: Brian Picciano Date: Sat, 21 May 2022 14:07:14 -0600 Subject: Remove old code related to static, it's not needed anymore --- .../src/_posts/2021-08-26-the-syntax-of-ginger.md | 480 --------------------- 1 file changed, 480 deletions(-) delete mode 100644 static/src/_posts/2021-08-26-the-syntax-of-ginger.md (limited to 'static/src/_posts/2021-08-26-the-syntax-of-ginger.md') diff --git a/static/src/_posts/2021-08-26-the-syntax-of-ginger.md b/static/src/_posts/2021-08-26-the-syntax-of-ginger.md deleted file mode 100644 index 4ff64d8..0000000 --- a/static/src/_posts/2021-08-26-the-syntax-of-ginger.md +++ /dev/null @@ -1,480 +0,0 @@ ---- -title: >- - The Syntax of Ginger -description: >- - Oh man, this got real fun real quick. -series: ginger -tags: tech ---- - -Finally I have a syntax for ginger that I'm happy with. This has actually been a -huge roadblock for me up till this point. There's a bit of a chicken-and-the-egg -problem with the syntax: without pinning down the structures underlying the -syntax it's difficult to develop one, but without an idea of syntax it's -difficult to know what structures will be ergonomic to use. - -I've been focusing on the structures so far, and have only now pinned down the -syntax. Let's see what it looks like. - -## Preface: Conditionals - -I've so far written [two][cond1] [posts][cond2] regarding conditionals in -ginger. After more reflection, I think I'm going to stick with my _original_ -gut, which was to only have value and tuple vertices (no forks), and to use a -function which accepts both a boolean and two input edges: the first being the -one to take if the boolean is true, and the second being the one to take if it's -false. - -Aka, the very first proposal in the [first post][cond1]. It's hard to justify -up-front, but I think once you see it in action with a clean syntax you'll agree -it just kind of works. - -[cond1]: {% post_url 2021-03-01-conditionals-in-ginger %} -[cond2]: {% post_url 2021-03-04-conditionals-in-ginger-errata %} - -## Designing a Syntax - -Ginger is a bit of a strange language. It uses strange datastructures in strange -ways. But approaching the building of a syntax for any language is actually -straightforward: you're designing a serialization protocol. - -To pull back a bit, consider a list of words. How would you encode this list in -order to write it to a file? To answer this, let's flip the question: how would -you design a sequence of characters (ie the contents of the file) such that the -reader could reconstruct the list? - -Well, constructing the list from a sequence of characters requires being able to -construct it _at all_, so in what ways is the list constructed? For this list, -let's say there's only an append operation, which accepts a list and a value to -append to it, and returns the result. - -If we say that append is encoded via wrapping parenthesis around its two -arguments, and that `()` encodes the empty list, then we get a syntax like... - -``` -(((() foo) bar) baz) -``` - -...which, in this instance, decodes to a list containing the words, "foo", "bar", -and "baz", in that order. - -It's not a pretty syntax, but it demonstrates the method. If you know how the -datastructure is constructed via code, you know what capabilities the syntax must -have and how it needs to fit together. - -## gg - -All of this amounted to me needing to implement the ginger graph in some other -language, in order to see what features the syntax must have. - -A few years ago I had begun an implementation of a graph datastructure in go, to -use as the base (or at least a reference) for ginger. I had called this -implementation `gg` (ginger graph), with the intention that this would also be -the file extension used to hold ginger code (how clever). - -The basic qualities I wanted in a graph datastructure for ginger were, and still -are: - -* Immutability, ie all operations which modify the structure should return a - copy, leaving the original intact. - -* Support for tuples. - -* The property that it should be impossible to construct an invalid graph. An - invalid graph might be, for example, one where there is a single node with no - edges. - -* Well tested, and reasonably performant. - -Coming back to all this after a few years I had expected to have a graph -datastructure implemented, possibly with immutability, but lacking in tuples and -tests. As it turns out I completely underestimated my past self, because as far -as I can tell I had already finished the damn thing, tuples, tests and all. - -It looks like that's the point where I stopped, probably for being unsure about -some other aspect of the language, and my motivation fell off. The fact that -I've come back to ginger, after all these years, and essentially rederived the -same language all over again, gives me a lot of confidence that I'm on the right -track (and a lot of respect for my past self for having done all this work!) - -The basic API I came up with for building ginger graphs (ggs) looks like this: - -```go -package gg - -// OpenEdge represents an edge with a source value but no destination value, -// with an optional value on it. On its own an OpenEdge has no meaning, but is -// used as a building block for making Graphs. -type OpenEdge struct{ ... } - -// TupleOut constructs an OpenEdge leading from a tuple, which is comprised of -// the given OpenEdges leading into it, with an optional edge value. -func TupleOut(ins []OpenEdge, edgeVal Value) OpenEdge - -// ValueOut constructs an OpenEdge leading from a non-tuple value, with an -// optional edge value. -func ValueOut(val, edgeVal Value) OpenEdge - -// ZeroGraph is an empty Graph, from which all Graphs are constructed via calls -// to AddValueIn. -var ZeroGraph = &Graph{ ... } - -// Graph is an immutable graph structure, formed from a collection of edges -// between values and tuples. -type Graph struct{ ... } - -// AddValueIn returns a new Graph which is a copy of the original, with the -// addition of a new edge. The new edge's source and edge value come from the -// given OpenEdge, and the edge's destination value is the given value. -func (g *Graph) AddValueIn(oe OpenEdge, val Value) *Graph -``` - -The actual API is larger than this, and includes methods to remove edges, -iterate over edges and values, and perform unions and disjoins of ggs. But the -above are the elements which are required only for _making_ ggs, which is all -that a syntax is concerned with. - -As a demonstration, here is how one would construct the `min` operation, which -takes two numbers and returns the smaller, using the `gg` package: - -```go -// a, b, in, out, if, etc.. are Values which represent the respective symbol. - -// a is the result of passing in to the 0 operation, ie a is the 0th element of -// the in tuple. -min := gg.ZeroGraph.AddValueIn(gg.ValueOut(in, 0), a) - -// b is the 1st element of the in tuple -min = min.AddValueIn(gg.ValueOut(in, 1), b) - -// out is the result of an if which compares a and b together, and which returns -// the lesser. -min = min.AddValueIn(out, gg.TupleOut([]gg.OpenEdge{ - gg.TupleOut([]gg.OpenEdge{a, b}, lt), - a, - b, -}, if) -``` - -And here's a demonstration of how this `min` would be used: - -```go -// out is the result of passing 1 and 5 to the min operation. -gg.ZeroGraph.AddValueIn(gg.TupleOut([]gg.OpenEdge{1, 5}, min), out) -``` - -## Make it Nice - -_Technically_ we're done. We have an implementation of the language's underlying -structure, and a syntax which encodes it (ie the ugly ass go syntax above). But -obviously I'm not proposing anyone actually use that. - -Another thing I found when digging around in the old ginger repo was a text -file, tucked away in a directory called "sandbox", which had a primitive syntax -which _almost_ worked. I won't copy it here, but you can find it if you care to. -But with that as a foundation I came up with a crude, rough draft spec, which -maps the go syntax to the new syntax. - -``` -ValueOut(val, edgeVal) : -edgeVal-val -ValueOut(val, null) : -val -TupleOut([]val, edgeVal) : -edgeVal-(val, ...) -TupleOut([]val, null) : -(val, ...) -Graph(openEdge->val, ...) : { val openEdge, ... } -``` - -A couple things to note about this spec: - -* `null` is used to indicate absence of value on an edge. The details of `null` - are yet to be worked out, but we can use this placeholder for now. - -* `Graph` is cheating a bit. In the original `gg` implementation a Graph gains - its OpenEdge/Value pairs via successive calls to `AddValueIn`. However, such a - pattern doesn't translate well to text, and since we're dealing purely with - constructing an entire Graph at once we can instead have our Graph syntax - declare all OpenEdge/Value pairs at once. - -* It's backwards! Eg where the go syntax does `ValueOut(val, edgeVal)`, the - proposed spec puts the values in the opposite order: `-edgeVal-val`. The - former results in code which is read from input to output, while the latter - results in the opposite: output to input. - - This was a tip I picked up from the old text file I found, and the result is - code which is more familiar to an existing programmer. I _think_ (but am - not sure) that it's also more in line with how programming is done mentally, - ie we start with a result and work backwards to figure out what it takes to - get there. - - It's possible, though, that I'm wrong, so at this end of this post I'm going - to put some examples of the same code both "forwards" and "backwards" and see - how I feel about it. - -With all that said, let's see it in action! Here's `min` implemented in our shiny new syntax: - -``` -min -{ - a -0-in, - b -1-in, - out -if-( - -lt-(-a,-b), - -a, - -b - ) -} -``` - -and then here's it being used: - -``` -out -min-(-1,-5) -``` - -## Make it _Nicer_ - -The most striking feature of this rough draft spec is all the prefix dashes, -such as in the `-min-(-1,-5)` statement. These dashes were included as they make -sense in the context of what the intended human interpretation of the structure -is: two values, `1`, and `5`, are being _piped into_ the two slots of a 2-tuple, -and that 2-tuple is being _piped into_ the `min` operation, the output of which -is being _piped into_ something `out`. - -The "piping into" is what the dash represents, which is why the top level values -in the graph, `a`, `b`, and `out`, don't have a preceding dash; they are the -ultimate destinations of the pipes leading to them. But these pipes are -ultimately ugly, and also introduce odd questions like "how do we represent --1?", so they need to go. - -So I've made a second draft, which is only a few changes away from the rough, -but oh man do those changes make a world of difference. Here's the cleaned up -spec: - -``` -ValueOut(val, edgeVal) : edgeVal(val) -ValueOut(val, null) : val -TupleOut([]val, edgeVal) : edgeVal(val, ...) -TupleOut([]val, null) : (val, ...) -Graph(openEdge->val, ...) : { val = openEdge, ... } -``` - -The dashes were simply removed, and the `edgeVal` and `val` concatted together. -For `ValueOut(val, edgeVal)` wrapping parenthesis were put around `val`, to -delineate it and `edgeVal`. This conflicts with the syntax for `TupleOut([]val, -edgeVal)`, but that conflict is easy to remedy: when parenthesis wrap only a -single `val` then that is a `ValueOut`, otherwise it's a `TupleOut`. - -Another change is to add an `=` between the `val` and `openEdge` in the `Graph` -constructor. This is a purely aesthetic change, but as you'll see it works well. - -So let's see it! `min` implemented with this cleaned up syntax: - -``` -min = { - a = 0(in), - b = 1(in), - out = if( - lt(a,b), - a, - b - ) -} -``` - -And then its use: - -``` -min(1,5) -``` - -Well well well, look what we have here: a conventional programming language -syntax! `{`/`}` wrap a scope, and `(`/`)` wrap function arguments and -(optionally) single values. It's a lot clearer now that `0` and `1` are being -used as operations themselves when instantiating `a` and `b`, and `if` is much -more readable. - -I was extremely surprised at how well this actually worked out. Despite having -drastically different underpinnings than most languages it ends up looking both -familiar and obvious. How cool! - -## Examples Examples Examples - -Here's a collection of example programs written in this new syntax. The base -structure of these are borrowed from previous posts, I'm merely translating that -structure into a new form: - -``` -// decr outputs one less than the input. -decr = { out = add(in, -1) } - -// fib accepts a number i, and outputs the ith fibonacci number. -fib = { - - inner = { - n = 0(in), - a = 1(in), - b = 2(in), - - out = if(zero?(n), - a, - inner(decr(n), b, add(a,b)) - ) - - }, - - out = inner(in, 0, 1) -} - -// map accepts a sequence and a function, and returns a sequence consisting of -// the result of applying the function to each of the elements in the given -// sequence. -map = { - inner = { - mapped-seq = 0(in), - orig-seq = 1(in), - op = 2(in), - - i = len(mapped-seq), - - // graphs provide an inherent laziness to the language. Just because - // next-el is _defined_ here doesn't mean it's evaluated here at runtime. - // In reality it will only be evaluated if/when evaluating out requires - // evaluating next-el. - next-el = op(i(orig-seq)), - next-mapped-seq = append(mapped-seq, next-el), - - out = if( - eq(len(mapped-seq), len(orig-seq)), - mapped-seq, - inner(next-mapped-seq, orig-seq, op) - ) - } - - // zero-seq returns an empty sequence - out = inner(zero-seq(), 0(in), 1(in)) -} -``` - -## Selpmexa Selpmexa Selpmexa - -Our syntax encodes a graph, and a graph doesn't really care if the syntax was -encoded in an input-to-output vs an output-to-input direction. So, as promised, -here's all the above examples, but "backwards": - -``` -// min returns the lesser of the two numbers it is given -{ - (in)0 = a, - (in)1 = b, - - ( - (a,b)lt, - a, - b - )if = out - -} = min - -// decr outputs one less than the input. -{ (in, -1)add = out } = decr - -// fib accepts a number i, and outputs the ith fibonacci number. -{ - { - (in)0 = n, - (in)1 = a, - (in)2 = b, - - ( - (n)zero? - a, - ((n)decr, b, (a,b)add)inner - )if = out - - } = inner, - - (in, 0, 1)inner = out - -} = fib - -// map accepts a sequence and a function, and returns a sequence consisting of -// the result of applying the function to each of the elements in the given -// sequence. -{ - { - (in)0 = mapped-seq, - (in)1 = orig-seq, - (in)2 = op, - - (mapped-seq)len = i, - - ((orig-seq)i)op = next-el, - (mapped-seq, next-el)append = next-mapped-seq, - - ( - ((mapped-seq)len, (orig-seq)len)eq, - mapped-seq, - (next-mapped-seq, orig-seq, op)inner - )if = out - - } = inner, - - (()zero-seq, (in)0, (in)1)inner = out -} = map -``` - -Do these make you itchy? They kind of make me itchy. But... parts of them also -appeal to me. - -The obvious reason why these feel wrong to me is the placement of `if`: - -``` -( - (a,b)lt, - a, - b -)if = out -``` - -The tuple which is being passed to `if` here is confusing unless you already -know that it's going to be passed to `if`. But on your first readthrough you -won't know that till you get to the end, so you'll be in the dark until then. -For more complex programs I'm sure this problem will compound. - -On the other hand, pretty much everything else looks _better_, imo. For example: - -``` -// copied and slightly modified from the original to make it even more complex - -(mapped-seq, ((orig-seq)i)op)append = next-mapped-seq -``` - -Something like this reads very clearly to me, and requires a lot less mental -backtracking to comprehend. The main difficulty I have is tracking the -parenthesis, but the overall "flow" of data and the order of events is plain to -read. - -## Next Steps - -The syntax here is not done yet, not by a long shot. If my record with past -posts about ginger (wherein I've "decided" on something and then completely -backtracked in later posts every single time) is any indication then this syntax -won't even look remotely familiar in a very short while. But it's a great -starting point, I think, and raises a lot of good questions. - -* Can I make parenthesis chains, a la the last example, more palatable in some - way? - -* Should I go with the "backwards" syntax afterall? In a functional style of - programming `if` statements _should_ be in the minority, and so the syntax - which better represents the flow of data in that style might be the way. - -* Destructuring of tuples seems to be wanted, as evidenced by all the `a = - 0(in)` lines. Should this be reflected in the structure or solely be - syntactical sugar? - -* Should the commas be replaced with any whitespace (and make commas count as - whitespace, as clojure has done)? If this is possible then I think they should - be, but I won't know for sure until I begin implementing the parser. - -And, surely, many more! I've felt a bit lost with ginger for a _long_ time, but -seeing a real, usable syntax emerge has really invigorated me, and I'll be -tackling it again in earnest soon (fingers crossed). -- cgit v1.2.3