maddy vps

2 files changed, 115 insertions, 0 deletions

diff --git a/src/_posts/2021-07-06-maddy-vps.md b/src/_posts/2021-07-06-maddy-vps.md
new file mode 100644
index 0000000..93c76d2
--- /dev/null
+++ b/src/_posts/2021-07-06-maddy-vps.md
@@ -0,0 +1,115 @@
+---
+title: >-
+    Setting Up maddy On A VPS
+description: >-
+    We have delivery!
+tags: tech
+series: selfhost
+---
+
+In the previous post I left off with being blocked by my ISP from sending
+outbound emails on port 25, effectively forcing me to set up [maddy][maddy] on a
+virtual private server (VPS) somewhere else.
+
+After some research I chose [Vultr][vultr] as my VPS of choice. They apparently
+don't block you from sending outbound emails on port 25, and are in general
+pretty cheap. I rented their smallest VPS server for $5/month, plus an
+additional $3/month to reserve an IPv4 address (though I'm not sure I really
+need that, I have dDNS set up at home and could easily get that working here as
+well).
+
+## TLS
+
+The first major hurdle was getting TLS certs for `mydomain.com` (not the real
+domain) onto my Vultr box. For the time being I've opted to effectively
+copy-paste my local [LetsEncrypt][le] setup to Vultr, using certbot to
+periodically update my records using DNS TXT challenges.
+
+The downside to this is that I now require my Cloudflare API key to be present
+on the Vultr box, which effectively means that if the box ever gets owned
+someone will have full access to all my DNS. For now I've locked down the box as
+best as I can, and will look into changing the setup in the future. There's two
+ways I could go about it:
+
+* SCP the certs from my local box to the remote everytime they're renewed. This
+  would require setting up a new user on the remote box with very narrow
+  privileges. This isn't the worst thing though.
+
+* Use a different challenge method than DNS TXT records.
+
+But again, I'm trying to set up maddy, not LetsEncrypt, and so I needed to move
+on.
+
+## Deployment
+
+In the previous post I talked about how I'm using nix to generate a systemd
+service file which encompasses all dependencies automatically, without needing
+to install anything to the global system or my nix profile.
+
+Since that's already been set up, it's fairly trivial to use `nix-copy-closure`
+to copy a service file, and _all_ of its dependencies (including configuration)
+from my local box to the remote Vultr box. Simply:
+
+```
+nix-copy-closure -s <ssh host> <nix store path>
+```
+
+I whipped up some scripts around this so that I can run a single make target and
+have it build the service (and all deps), do a `nix-copy-closure` to the remote
+host, copy the service file into `/etc/systemd/service`, and restart the
+service.
+
+## Changes
+
+For the most part the maddy deployment on the remote box is the same as on the
+local one. Down the road I will likely change them both significantly, so that
+the remote one only deals with SMTP (no need for IMAP) and the local one will
+automatically forward all submitted messages to it.
+
+Once that's done, and the remote Vultr box is set up on my [nebula][nebula]
+network, there won't be a need for the remote maddy to do any SMTP
+authentication, since the submission endpoint can be made entirely private.
+
+For now, however, I've set up maddy on the remote box's public interface with
+SMTP authentication enabled, to make testing easier.
+
+## Testing
+
+And now, to test it! I changed the SMTP credentials in my `~/.mailrc` file as
+appropriate, and let a test email rip:
+
+```
+echo 'Hello! This is a cool email' | mailx -s 'Subject' -r 'Me <me@mydomain.com>' 'test.email@gmail.com'
+```
+
+This would, ideally, send an email from my SMTP server (on my domain) to a test
+gmail domain. Unfortunately, it did not do that, but instead maddy spit this out
+in its log:
+
+> maddy[1547]: queue: delivery attempt failed        {"msg_id":"330a1ed9","rcpt":"mediocregopher@gmail.com","reason":"[2001:19f0:5001:355a:5400:3ff:fe73:3d02] Our system has detected that\nthis message does not meet IPv6 sending guidelines regarding PTR\nrecords and authentication. Please review\n https://support.google.com/mail/?p=IPv6AuthError for more information\n. gn42si18496961ejc.717 - gsmtp","remote_server":"gmail-smtp-in.l.google.com.","smtp_code":550,"smtp_enchcode":"5.7.1","smtp_msg":"gmail-smtp-in.l.google.com. said: [2001:19f0:5001:355a:5400:3ff:fe73:3d02] Our system has detected that\nthis message does not meet IPv6 sending guidelines regarding PTR\nrecords and authentication. Please review\n https://support.google.com/mail/?p=IPv6AuthError for more information\n. gn42si18496961ejc.717 - gsmtp"}
+
+Luckily Vultr makes setting up PTR records for reverse DNS fairly easy. They
+even allowed me to do it on my box's IPv6 address which I'm not paying to
+reserve (though I'm not sure what the long-term risks of that are... can it
+change?).
+
+Once done, I attempted to send my email again, and what do you know...
+
+![Success!](/assets/maddy-vps/success.png)
+
+Success!
+
+So now I can send emails. There are a few next steps from here:
+
+* Get the VPS on my nebula network and lock it down properly.
+
+* Fix the TLS cert situation.
+
+* Set up the remote maddy to forward submissions to my local maddy.
+
+* Use my sick new email!
+
+[maddy]: https://maddy.email
+[le]: https://letsencrypt.org/
+[vultr]: https://www.vultr.com/
+[nebula]: https://github.com/slackhq/nebula
diff --git a/src/assets/maddy-vps/success.png b/src/assets/maddy-vps/success.png
new file mode 100644
index 0000000..3d24c25
--- /dev/null
+++ b/src/assets/maddy-vps/success.png