diff options
Diffstat (limited to 'static/src/_posts')
| -rw-r--r-- | static/src/_posts/2021-04-22-composing-processes-into-a-static-binary-with-nix.md | 1 | ||||
| -rw-r--r-- | static/src/_posts/2021-09-22-building-appimages-with-nix.md | 267 |
2 files changed, 268 insertions, 0 deletions
diff --git a/static/src/_posts/2021-04-22-composing-processes-into-a-static-binary-with-nix.md b/static/src/_posts/2021-04-22-composing-processes-into-a-static-binary-with-nix.md index 885d56b..ebc0f7b 100644 --- a/static/src/_posts/2021-04-22-composing-processes-into-a-static-binary-with-nix.md +++ b/static/src/_posts/2021-04-22-composing-processes-into-a-static-binary-with-nix.md @@ -3,6 +3,7 @@ title: >- Composing Processes Into a Static Binary With Nix description: >- Goodbye, docker-compose! +tags: tech --- It's pretty frequent that one wants to use a project that requires multiple diff --git a/static/src/_posts/2021-09-22-building-appimages-with-nix.md b/static/src/_posts/2021-09-22-building-appimages-with-nix.md new file mode 100644 index 0000000..956f912 --- /dev/null +++ b/static/src/_posts/2021-09-22-building-appimages-with-nix.md @@ -0,0 +1,267 @@ +--- +title: >- + Building AppImages with Nix +description: >- + With some process trees thrown in there for fun. +series: nebula +tags: tech +--- + +It's been a bit since I've written an update on the cryptic nebula project, +almost 5 months (since [this post][lastnix], which wasn't officially part of the +blog series but whatever). Since then it's switched names to "cryptic-net", and +that we would likely use [MinIO](https://min.io/) as our network storage +service, but neither of those is the most interesting update. + +The project had been stalled because of a lack of a build system which could +fulfill the following requirements: + +* Network configuration (static IP, VPN certificates) of individual hosts is + baked into the binary they run. + +* Binaries are completely static; no external dependencies need to exist on the + host in order to run them. + +* Each binary runs a composition of multiple sub-services, each being a separate + sub-process, and all of them having been configured to work together (with + some possible glue code on our side) to provide the features we want. + +* The builder itself should be deterministic; no matter where it runs it should + produce the same binary given the same input parameters. + +Lacking such a build system we're not able to distribute the program in a way +which "just works"; it would require some kind of configuration, or some kind of +runtime environment to be set up, both of which would be a pain for users. And +lacking a definite build system makes it difficult to move forward on any other +aspect of a project, as it's not clear what may need to be redone in the future +when the build system is decided upon. + +## Why not nix-bundle? + +My usage of [nix-bundle][nix-bundle] in a [previous post][lastnix] was an +attempt at fulfilling these requirements. Nix in general does very well in +fulfilling all but the second requirement, and nix-bundle was supposed to +fulfill even that by packaging a nix derivation into a static binary. + +And all of this it did! Except that the mechanism of nix-bundle is a bit odd. +The process of a nix-bundle'd binary jails itself within a chroot, which it then +uses to fake the `/nix/store` path which nix built binaries expect to exist. + +This might work in a lot of cases, but it did not work in ours. For one, [nebula +can't create its network interface when run from inside +nix-bundle's chroot][nix-bundle-issue]. For another, being run in a chroot means +there's going to be strange restrictions on what our binary is able to do and +not. + +## AppImage + +What we really needed was an [AppImage][appimage]. AppImages are static binaries +which can bundle complex applications, even those which don't expect to be +bundled into single binaries. In this way the end result is the same as +nix-bundle, but the mechanism AppImage uses is different and places far fewer +restrictions on what we can and can't do with our program. + +## Building Sub-Services Statically with Nix + +It's probably possible to use nix to generate an AppImage which has the +`/nix/store` built into it, similar to what nix-bundle does, and therefore not +worry about whether the binaries it's bundling are static or not. But if your +services are written in sane languages it's not that difficult to build them +statically and dodge the issue. + +For example, here is how you build a go binary statically: + +``` +{ + buildGoModule, + fetchFromGitHub, +}: + buildGoModule rec { + pname = "nebula"; + version = "1.4.0"; + + src = fetchFromGitHub { + owner = "slackhq"; + repo = pname; + rev = "v${version}"; + sha256 = "lu2/rSB9cFD7VUiK+niuqCX9CI2x+k4Pi+U5yksETSU="; + }; + + vendorSha256 = "p1inJ9+NAb2d81cn+y+ofhxFz9ObUiLgj+9cACa6Jqg="; + + doCheck = false; + + subPackages = [ "cmd/nebula" "cmd/nebula-cert" ]; + + CGO_ENABLED=0; + tags = [ "netgo" ]; + ldflags = [ + "-X main.Build=${version}" + "-w" + "-extldflags=-static" + ]; + }; +``` + +And here's how to statically build a C binary: + +``` +{ + stdenv, + glibcStatic, # e.g. pkgs.glibc.static +}: + stdenv.mkDerivation rec { + pname = "dnsmasq"; + version = "2.85"; + + src = builtins.fetchurl { + url = "https://www.thekelleys.org.uk/dnsmasq/${pname}-${version}.tar.xz"; + sha256 = "sha256-rZjTgD32h+W5OAgPPSXGKP5ByHh1LQP7xhmXh/7jEvo="; + }; + + nativeBuildInputs = [ glibcStatic ]; + + makeFlags = [ + "LDFLAGS=-static" + "DESTDIR=" + "BINDIR=$(out)/bin" + "MANDIR=$(out)/man" + "LOCALEDIR=$(out)/share/locale" + ]; + }; +``` + +The derivations created by either of these expressions can be plugged right into +the `pkgs.buildEnv` used to create the AppDir (see AppDir section below). + +## Process Manager + +An important piece of the puzzle for getting our nebula project into an AppImage +was a process manager. We need something which can run multiple service +processes simultaneously, restart processes which exit unexpectedly, gracefully +handle shutting down all those processes, and coalesce the logs of all processes +into a single stream. + +There are quite a few process managers out there which could fit the bill, but +finding any which could be statically compiled ended up not being an easy task. +In the end I decided to see how long it would take me to implement such a +program in go, and hope it would be less time than it would take to get +`circus`, a python program, bundled into the AppImage. + +2 hours later, [pmux][pmux] was born! Check it out. It's a go program so +building it looks pretty similar to the nebula builder above, so I won't repeat +it. However I will show the configuration we're using for it within the +AppImage, to show how it ties all the processes together: + +```yaml +processes: + - name: nebula + cmd: bin/nebula + args: + - "-config" + - etc/nebula/nebula.yml + + - name: dnsmasq + cmd: bin/dnsmasq + args: + - "-d" + - "-C" + - ${dnsmasq}/etc/dnsmasq/dnsmasq.conf +``` + +## AppDir -> AppImage + +Generating an AppImage requires an AppDir. An AppDir is a directory which +contains all files required by a program, rooted to the AppDir. For example, if +the program expects a file to be at `/etc/some/conf`, then that file should be +places in the AppDir at `<AppDir-path>/etc/some/conf`. + +[These docs](https://docs.appimage.org/packaging-guide/manual.html#ref-manual) +were very helpful for me in figuring out how to construct the AppDir. I then +used the `pkgs.buildEnv` utility to create an AppDir derivation containing +everything the nebula project needs to run: + +``` + appDir = pkgs.buildEnv { + name = "my-AppDir"; + paths = [ + + # real directory containing non-built files, e.g. the pmux config + ./AppDir + + # static binary derivations shown previously + nebula + dnsmasq + pmux + ]; + }; +``` + +Once the AppDir is built one needs to use `appimagetool` to turn it into an +AppImage. There is an `appimagetool` build in the standard nixpkgs, but +unfortunately it doesn't seem to actually work... + +Luckily nix-bundle is working on AppImage support, and includes a custom build +of `appimagetool` which does work! + +``` +{ + fetchFromGitHub, + callPackage, +}: let + src = fetchFromGitHub { + owner = "matthewbauer"; + repo = "nix-bundle"; + rev = "223f4ffc4179aa318c34dc873a08cb00090db829"; + sha256 = "0pqpx9vnjk9h24h9qlv4la76lh5ykljch6g487b26r1r2s9zg7kh"; + }; +in + callPackage "${src}/appimagetool.nix" {} +``` + +Using `callPackage` on this expression will give you a functional `appimagetool` +derivation. From there's it's a simple matter of writing a derivation which +generates the AppImage from a created AppDir: + +``` +{ + appDir, + appimagetool, +}: + pkgs.stdenv.mkDerivation { + name = "program-name-AppImage"; + + src = appDir; + buildInputs = [ appimagetool ]; + ARCH = "x86_64"; # required by appimagetool + + builder = builtins.toFile "build.sh" '' + source $stdenv/setup + cp -rL "$src" buildAppDir + chmod +w buildAppDir -R + mkdir $out + + # program-name needs to match the desktop file in the AppDir + appimagetool program-name "$out/program-name-bin" + ''; + } +``` + +Running that derivation deterministically spits out a binary at +`result/program-name-bin` which can be executed and run immediately, on any +system using the same CPU architecture. + +## Fin + +I'm extremely hyped to now have the ability to generate binaries for our nebula +project that people can _just run_, without them worrying about which +sub-services that binary is running under-the-hood. From a usability perspective +it's way nicer than having to tell people to "install docker" or "install nix", +and from a dev perspective we have a really solid foundation on which to build a +quite complex application. + +[lastnix]: {% post_url 2021-04-22-composing-processes-into-a-static-binary-with-nix %} +[nix-bundle]: https://github.com/matthewbauer/nix-bundle +[nix-bundle-issue]: https://github.com/matthewbauer/nix-bundle/issues/78 +[appimage]: https://appimage.org/ +[pmux]: https://github.com/cryptic-io/pmux |